Industrial equipments, home appliances, amusement devices and education equipments.
Part number | TZ2100XBG | TZ2101XBG | TZ2102XBG |
---|---|---|---|
Core | Arm® Cortex®-A9 MPCore L1I Cache:32 kByte, L1D Cache:32 kByte L2 Cache:128 kByte |
||
Maximum operating frequency | 300 MHz | 600 MHz | |
FPU (Floating Point Unit) | Integrated | ||
Encrypt data function | Non-supported | Supported | Non-supported |
RAM | 1 MByte SRAM 32 kByte SRAM (for back-up) |
||
DRAM controller | DDR3/DDR3L×16 bit | ||
External extended bus interface | Address: 27 bit, Data: 32 bit | ||
Graphics accelerator | Toshiba original 2D graphics accelerator | ||
LCD Controller | WVGA (800 x 480 pixel) 60 fps , 24-bit Parallel I/F | ||
High speed interface controller |
USB2.0 host interface, USB2.0 device interface, 10/100 Ethernet MAC | ||
Peripheral function | DMA controller, Timer/Counter, RTC | ||
Peripherals | Camera I/F, UART×4, I2C×4, I2S×2, SPIM×7, SPIB×2,PWM×6, 12bitADC×4, SDIO×3, e-MMCx1, GPIO | ||
Power supply voltage | Core=1.1V, I/O=3.3V | ||
Package | LFBGA 310-pin, 16mm x 16mm, 0.8mm pitch | ||
Status | Mass production |
Setting example of “Configuration pin”
TZ2100XBG | TZ2101XBG/TZ2102XBG | |||
---|---|---|---|---|
Setting example | Use Media I/F | Use External Bus I/F | Use Media I/F | Use External Bus I/F |
CPU | Cortex-A9 300MHz +FPU L1I$ 32kB/L1D$ 32kB, L2$ 128kB |
Cortex-A9 600MHz +FPU L1I$ 32kB/L1D$ 32kB, L2$ 128kB |
||
Graphics | 2D Graphics (BitBLT) | - | 2D Graphics (BitBLT) | - |
Security (※Option) |
- | Secure Engine(supported by TZ2101) | ||
DRAM I/F | DDR3/3L x16bit | DDR3/3L x16bit | ||
SRAM | 1MB Back-up 32kB |
1MB |
||
Camera I/F | 8bit Parallel Camera I/F | - | 8bit Parallel Camera I/F | - |
External Bus I/F | - | A=27bit, D=32bit/16bit/8bit | - | A=27bit, D=32bit/16bit/8bit |
LCD I/F | WVGA 60fps |
- | WVGA 60fps 24bit Parallel I/F |
- |
USB ※Exclusive use |
USB2.0 Host/Device 1ch(Option) | USB2.0 Host/Device 1ch | ||
Ether | 10/100 Ethernet MAC | - | 10/100 Ethernet MAC | - |
RTC | 1 | 1 | ||
SPIM(SPITX) SPIB SPIS |
- 2ch 1ch |
7ch - - |
- 2ch 1ch |
7ch - - |
UART/PPI | 3ch | 4ch | 3ch | 4ch |
PWM | 6ch | 6ch | ||
I2C | 4ch | 2ch | 4ch | 2ch |
I2S | 2ch | 2ch | ||
Timer WDT DMAC |
32bit×9ch 1ch 8ch |
32bit×9ch 1ch 8ch |
||
ADC | 4ch | 4ch | ||
SDIO/e-MMC/SD Card | 3ch | - | 3ch | - |
GPIO(MAX) | 128ch(Dedicated 4ch+ Share 124ch) | 128ch(Dedicated 4ch+Share 124ch) | ||
Package | BGA 310pin(16mm×16mm, 0.8mm pitch) | BGA 310pin(16mm×16mm, 0.8mm pitch) |
TZ2100 reference board is a development starter kit including evaluation board for TZ2100 performance evaluation, eager evaluation for software and making prototype, set with BSP(Board Support Package).
Evaluation board are lined up with 2 kinds of boards which can use camera/LCD display and can use amusement equipment interface. As for BSP, 2 types of OS can be selected depend on the customer usage.
Shipping No. | RBTZ2100-1MA-A1 |
---|---|
CPU | TZ2102XBG |
Overview | ![]() |
Dimensions | 150mm × 130mm |
Main Function |
|
Where to buy / rent |
Please contact to our sales division. |
*1 : http://www.ss-technologies.co.jp/en/index.html (A new window will open.)
Part number | OS | Distribution | Device Driver |
---|---|---|---|
RBTZ2100-1MA-A1 RBTZ2100-1MA-A2 |
Linux® (Ubuntu® 14.04 Arm hf) |
gcc | Ethernet, UART, SPIB, I2C, Audio, GPIO, SPIM, USB(EHCI/OHCI), e-MMC, Memory Allocator, SD/SDIO |
μ-ITRON | µC3/Standard (eForce Co., Ltd.)*2 | Ethernet, UART, SPIB, I2C, Audio, GPIO, SPIM, Memory Allocator, SD/SDIO | |
RBTZ2100-2MA-A2 | - | IAR Embedded Workbench EWARM (IAR Systems®)*3 | UART, GPIO, I2C, SPIM,Audio |
*2: http://www.eforce.co.jp/products/microc3s (A new window will open.)
*3: https://www.iar.com/iar-embedded-workbench/ (A new window will open.)
* Arm and Cortex are trademarks or registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
* Linux is a registered trademark of Linus Torvalds in the U.S. and other countries.
* All other trademarks and trade names are properties of their respective owners.
If you have technical questions,
(to input form)
If you have any questions, click one of these links: