Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Parametric Search

Stock Check & Purchase

Select Product Categories

TMPM341FDXBG

Not Recommended for New Design

TX03

Description

Description 32-bit high functionality, low-power microcontroller based on Cortex™-M3 core with high-precision PPG output ideal for motor control, 12-bit AD converter and 10-bit DA controller with enhanced analog performance suitable for lenses of camera.
NANO FLASH™
RoHS Compatible Product(s) (#) Available

Arm and Cortex are trademarks or registered trademarks of Arm Limited in the US and other countries.

NANO FLASH is a trademark of Toshiba Corporation.

Package Information

Toshiba Package Name P-TFBGA113-0606-0.50A4
Package Image P-TFBGA113-0606-0.50A4
Pins 113
Mounting Surface Mount

 Please refer to the link destination to check the detailed size.

Description

Property Value Unit
Group Name M340 -
Number of bits 32 bit
ROM size 512 Kbyte
ROM type Flash -
RAM size 32 Kbyte
DMA controllers 4 ch
internal data bus width 32 bit
external data bus width 16 bit
I/O Port 86 port
UART/SIO 5 ch
I2C/SIO 2 ch
Timer/counter(16bit) 10 ch
high-resolution 16-bit timer/PPG output 2 ch
A/D converters(12bit) 15 ch
D/A converters(10bit) 2 ch
watchdog timer Available -
Oscillation frequency detector Available -
On-chip debug function Available -
JTAG (Boundary-Scan) Available -
trace func Available -
Clock gear function Available -
Interrupt controllers 12 pins
CS/WAIT controller 2 ch
Multiply and accumulation unit Available -
Sync. Serial Interface 1 ch
If the voltage range is less than 2.7V, only some of the built-in functions such as external interface and SSP can be used.
Supply Voltage
(V)
Operation Frequency
(MHz)
Operating Temp
(degC)
Minimum instruction
execution time (µsec)
1.65 to 3.6 1 to 54 -40 to 85 0.0185

Development Systems

Document

  • If the checkbox is invisible, the corresponding document cannot be downloaded in batch.
Name Date

 

  • If the checkbox is invisible, the corresponding document cannot be downloaded in batch.

Notes

back to list
A new window will open
To Top