Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Parametric Search

Stock Check & Purchase

Select Product Categories


Not Recommended for New Design



Description An ARM Cortex™-M3 core based microcontroller with built-in 1-Mbyte flash ROM (making it suitable for software development), multiple serial channels (maximum 18 channels), a backup power module which reduces standby power consumption, CAN, USB 2.0 host controller and operates at a maximum operating frequency of 64MHz.
RoHS Compatible Product(s) (#) Available

Arm and Cortex are trademarks or registered trademarks of Arm Limited in the US and other countries.

NANO FLASH is a trademark of Toshiba Corporation.

Package Information

Toshiba Package Name LQFP144-P-2020-0.50E
Package Image LQFP144-P-2020-0.50E
Pins 144
Mounting Surface Mount
Package Dimensions View
Land pattern dimensions View

 Please refer to the link destination to check the detailed size.


Property Value Unit
Group Name M360 -
Number of bits 32 bit
ROM size 1024 Kbyte
ROM type Flash -
RAM size 64 Kbyte
DMA controllers 2 ch
internal data bus width 32 bit
external data bus width 16 bit
I/O Port 118 port
CAN controller 1 ch
UART/SIO 12 ch
I2C/SIO 5 ch
USB Host (Full Speed) 1 ch
Timer/counter(16bit) 16 ch
A/D converters(10bit) 16 ch
watchdog timer Available -
On-chip debug function Available -
trace func Available -
RTC 1 ch
Clock gear function Available -
dual clock operation Available -
Interrupt controllers 14 pins
CEC Function 1 ch
CS/WAIT controller 4 ch
HOLD function Available -
Multiply and accumulation unit Available -
remote control 2 ch
Sync. Serial Interface 1 ch
The power-supply voltage using a USB ranges from 3.0V to 3.45V.
The maximum operating frequency using a USB is 48MHz.
Supply Voltage
Operation Frequency
Operating Temp
Minimum instruction
execution time (µsec)
2.7 to 3.6 1 to 64 -40 to 85 0.0156

Development Systems


  • If the checkbox is invisible, the corresponding document cannot be downloaded in batch.
Name Date


  • If the checkbox is invisible, the corresponding document cannot be downloaded in batch.


back to list
A new window will open
To Top