Compatible with full-swing output

Conventional Output and Rail-to-Rail Output

In a typical photocoupler for driving power devices, the high-level output voltage drops by several volts from the power supply voltage. However, in the case of a full-swing (Rail to Rail) output compatible product, the output voltage is almost equal to the power supply voltage.
This contributes to reducing the power loss of the photocoupler during switching and to reducing the power loss of the power device.

The output voltage of the full-swing output product is higher than that of the non-full-swing output product, indicating that the voltage drop across the photocoupler is small.

Full-swing output compatible gate driver photocouplers

Related information

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs

Queries about purchasing, sampling and IC reliability

Stock Check & Purchase

keyword:

Disclaimer for External Link
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.
A new window will open