Contact us

A new window will open A new window will open

Development System

model15 In-Circuit Emulation System for 92CF29A/30

The model 15 In-Circuit Emulation System for 92CF29A/30 is an old type of the In-Circuit Emulation System.
The model 15 In-Circuit Emulation System for 92CF29A/30 is comprised of the Integrated Development Environment, model 15 controller, model 15 emulation pod, In-Circuit Adapter, and accessories.

model15 In-Circuit Emulation System for 92CF29A/30

Check the product names and numbers at this website
When purchasing a product, check the latest information at this web site. The product number of each product and the manufacturer's latest information can be checked with the search system of this web site. If the product number of your development target microcomputer is searched for, the information on the development system products will be displayed together with the detailed information on the microcomputers. The product information is also provided in "Product Numbers List" and "Comprehensive List (Microcomputers)" under "Document" for your use.
RTE900/H1 model 15 In-Circuit Emulation System for 92CF29A/30 Specifications
Host interface Ethernet, RS-232C (25pin straight cable)
Emulation memory Memory on target board
Event Number of points 8 points
Comparison items Address, data, status, external input
Comparison conditionscondition match, unmatch, range
Pass count 1 to 256 times
Event trigger actions Break, trace control, timer control, external trigger output
Event combinations AND, OR, sequential
Hardware break 4 points
Software break 1024 points
Trace memory Capacity 256 frames (Note)
Trace memory Modes free trace, trigger trace, overwriting prohibit, overflow stop
Trace items PC address, data address, data value, status, external output, external input, event
Timer measurement Run timer: 1 channel, Lap timer: 1 channel
Memory access Memory display during program execution 64 bytes
Memory rewrite during program execution -
Program variables Display Binary, octal, decimal, or hexadecimal display can be selected for each variable.
Registration Variables, arrays, structures and unions can be registered by the elements.
Sauce display - Source
- Source + assembler code
- Source + assembler code + machine language
External output 1 line
External input 1 line
Performance analysis: Module time measurement -
Performance analysis: Coverage measurement -
Flash programming/security feature External Flash memory can be programmed during debugging.
(Note) There are some cases where the trace memory capacity varies by a tracing condition or operating status.

RTE900/H1 model 15 In-Circuit Emulator for 92CF29A/30

Product Configuration and Appearance

Product Configuration and Appearance
Product Configuration and Appearance

Items to Be Prepared by Customer

  • Host system
  • Ethernet、RS-232C (25pin straight cable)
  • Target system
(Notes) The target microcomputer and the emulator have different features. For the difference, see the microcomputer's data sheet.
(Notes) For the operation assurance range and characteristics of the supplied power/clock, see the microcomputer's datasheet.

 

Content of Product

BM92CZ26XB0A-M15
  • BM92CZ26XB0A-M15
  • Communication cable (for OCDE)
  • Communication cable (for target)
  • Target connection adapter
  • FG cable
  • Manual
BMC92CF29F0A-G
  • BMC92CF29F0A-G (TMP92CF26AXBG is mounted.)
  • QFP adapter
  • Pin protector
  • Guide screw
  • Manual

BM92CZ26XB0A-M15 and BMC92CF29F0A-G
BM92CZ26XB0A-M15 and BMC92CF29F0A-G

Example of mounting BMC92CF29F0A-G
Example of mounting BMC92CF29F0A-G

  • About Emulation Operating Voltage/Frequency

    Any operating frequency and operating voltage in the device (TMP92CF26AXBG) of In-Circuit Adapter operation assurance range is available.

    Note that the power/clock cannot be supplied from the emulator to the target system.

RTE model 15

The photo of RTE model 15

RTE Controller model 15 is a control unit to set up RTE model 15 system. Using RTE Controller model 15 together with an emulation pod and a debugger, enables sophisticated debugging.

Contents of the product package

  • RTE Controller model 15
  • Emulation pod Connection cable 1
  • Emulation pod Connection cable 2
  • Power cable
  • The Integrated Development Environment (IDE):1 download license (from website) (Note)
  • User's manual
(Note) The Integrated Development Environment does not support TLCS-870/X Series. For the TLCS-870/X Series, purchase theTLCS-870/X Series Debugger.

 

SPEC ratings
Power supply AC100V - 240V
Power supply frequency 50Hz - 60Hz
External Dimensions 136(H)*130(W)*320(D)mm
Weight approx. 2.7kg

Accessories

A communication cable/connector is used for connecting an emulator to a target system.

The communication cable/connector is a product made by Samtec,Inc.
The connector is a product made by Tokyo Eletech Corporation.

Accessories

Communication cable

Name Part Number
Communication cable FFSD-10-D-07.00-01-N

Connector

Name Part Number
QFP adapter NQPACK176SE
Pin protector YQPACK176SE

Contacts

If you have any queries, click one of these links:

Technical queries
Queries about purchasing, sampling and IC reliability
To Top
·Before creating and producing designs and using, customers must also refer to and comply with the latest versions of all relevant TOSHIBA information and the instructions for the application that Product will be used with or for.