Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

Innovation Centre

At the Toshiba Innovation Centre we constantly strive to inspire you with our technologies and solutions. Discover how to place us at the heart of your innovations.

M4L Group Sample Software

This page provides a sample software download service for the M4L group.

Function list

Function list for sample software.

Sample Software/Function Description
Advanced Encoder Input Circuit (32-bit) A_ENC32 The rotation of the rotary encoder is detected in Encoder mode.
12-bit Analog to Digital Converter ADC 2-channel output voltages of the potentiometer are measured by the ADC.
Clock Control/Operation Mode CG Example of switching between Normal mode and Low Power mode
CRC Calculation Circuit CRC The CRC continuously receives the data in the specified region of the memory to calculate their CRC value.
Digital Noise Filter circuit DNF The port input by the switch is detected via DNF, and the external interrupt is generated.
Flash Memory FLASH 1. Examples of erasing in a page unit, erasing in a block unit, programming(write) operation to a code flash, and erasing in an area unit
2. Examples of setting the protection function and protection release
3. Example of rewriting the user information area of flash
4. Example of rewriting the flash data area by using User Boot mode
Voltage Detection Circuit LVD The voltage level is detected. The lighting of LEDs is controlled by the detection result.
Oscillation Frequency Detector OFD The frequency of a target clock (an external high-speed oscillator) is detected. The lighting of LEDs is controlled by the detection result.
Input/Output Port PORT Usage example of Port using LEDs and switches
RAM Parity RAMP The input character string from a terminal emulator is stored to the RAM by the write command. Its parity is also stored. The stored data in the RAM are read, the parity is checked, and the data are displayed on a terminal emulator.
Clock Selective Watchdog Timer SIWDT Example in which an NMI interrupt occurs and an example in which the clear code is periodically written and an NMI interrupt does not occur
32-bit Timer Event Counter T32A 1. A clock frequency input from outside is measured using the capture function.
2. Example of using the timer interrupt to turn on / off the LED every second
3. Output example of duty-variable PPG (programmable square wave)
Trimming Circuit TRM The frequency of the internal high-speed oscillator is adjusted using an external reference signal.
Serial Peripheral Interface TSPI It communicates using TSPI and outputs data to a terminal emulator.
Asynchronous Serial Communication Circuit UART 1. The data received from a terminal emulator are echoed back and output to the terminal emulator through the UART.
2. Example of receiving the character string from a terminal emulator
3. Example of sending the character string to a terminal emulator

Download

Please Select the appropriate file for download.

Name

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs
A new window will open