Uma nova janela será aberta
The Toshiba TZ1000 series application processors are integrated with Bluetooth® low energy (LE), a low-power wireless communication standard, a sensor, a processor and flash memory. These functions are tightly integrated into a single package reducing mounting area for small wearable devices. The application processor processes the data acquired by the sensor and consumes very low power suited to wearable devices that require long battery runtimes.
▼ Please click below for details.
||embedded NOR flash memory 8Mbit|
|Bluetooth® low energy||-|
|8.50 × 9.80 × 1.60||6.70×4.00×1.00||8.50 × 9.80 × 1.60||6.70 × 8.00× 1.59
Healthcare Sub Board
50.8mm(2”) x 17.78mm(0.7”)
50.8mm(2”) x 40.00mm(1.57”)
• USB Bus Power
- 2-LDO (3.3V USB/System + 2.5V ADC)
• 40-pin External I/O
- 6-ADC Port w/ 1-Sync Pulse Output
12bitADC+24bitADC=4+1 / 2+2 / 0+3
- 24-Free I/O (Shared)
4-Capture, Reset I/O, ５-Power I/O, 3-GND
• USB macroB w/ VBUS
• USB Hub
• USB-UART Conv.
• 2-Push SW(GPIO/Reset)
• JTAG/SWD Debug Port (Half pitch 10-pin)
• 6-Jumper (Power/USB/Mode Set)
• 4MB SPI Flash
• Charger IC
• Power Switch
• Voltage & Current Measurement Circuit
• On Board Li-ion Battery
• PPG LED Driver w/ PWM control
• Double-Sided & Large Electrodes
• PPG/SpO2 Sensor
(*1) : TZ1031 comes in the same package as TZ1011.The difference between both products is whether incorporating a magnetometer in the package or not.TZ1011 is upper compatible with TZ1031. It is possible to check functions of TZ1031 on RBTZ1011-4MA.
The software development kit (SDK) is the software to rapidly develop various application products.
Software libraries and sample software required for using the TZ1000 series effectively and to facilitate customers' development are provided.
HcSDP SDK is a package for healthcare application development.
It facilitates rapid development of healthcare applications.
HcSDP SDK provides libraries to measure activity and pulse wave.Because libraries are independent of OS, customers' existing environments can be used with them. Sample software is provided on FreeRTOS™ basis.
・ Sensor devices control
・ Receipt of sensor-detected data
・ Receipt of healthcare data
・ Analysis of healthcare data
・ Receipt and transmission of user-defined data
To download Board Support Package (BSP), software development kit (SDK) and some technical information other than the above, you are requested to register and confirm its SULA and sign it.
Please register and sign up to the following content.