Contact us

在新視窗打開 在新視窗打開

M360 Group

Microcontrollers with Integrated USB Supporting Diverse Applications Ranging from Digital Applications to Factory Automation and Office Equipment

Features

  • High-performance Arm® Cortex®-M3 core: 80-MHz operation (max)
  • Large-capacity embedded Flash ROM fabricated using Toshiba-original NANO FLASH™ technology
  • Various serial interfaces (up to 18 channels)
  • USB, USB Embedded Host, CAN and EtherMAC controllers suitable for multi-connection systems
  • External bus interface that can be connected to SoCs and external extended memory
  • Multi-purpose timers capable of controlling various motors and IGBTs
  • CEC interface and remote control signal preprocessor that remain active even in SLEEP mode
  • Oscillation frequency detection (OFD)
  • Small package

Applications

  • Printers
  • AV systems
  • Digital equipment
  • PC peripherals
  • Industrial equipment
  • Networking equipment
  • Office equipment

System Block Diagram (Printer)

System Block Diagram (Printer)

TX03 Series M360 group Product List

Product List

TX03 series M360 group products will be displayed.

* Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.

Features of the TMPM369FDFG and TMPM369FDXBG

Controls various interfaces independently – Contributing to reduction of the CPU workload

The TMPM369 has various external communication interfaces such as USB, USB Embedded Host, CAN, EtherMAC, SIO/UART, I2C/SIO and SSP (SPI mode). Additionally, the TMPM369 contains 2 units of AD converter and a programmable motor driver (PMD). All of them are designed to operate independently, significantly reducing the software workload. The TMPM369 provides Flash ROM of up to 512 KB and SRAM of up to 128 KB to facilitate the use of the various communication interfaces.

Controls various interfaces independently – Contributing to reduction of the CPU workload

High-speed AD conversion – Using 2 units of AD converter

The TMPM369 contains 2 units of ADC. Their combined use provides high-speed AD conversion. While a single ADC offers a minimum conversion time of 1.0 µs at 80 MHz, applying an analog signal to 2 units of ADC and using them in a time-interleaved manner significantly reduces the conversion time required*.

*0.5 ms minimum

High-speed AD conversion – Using 2 units of AD converter

聯繫方式

如您需查詢,請點擊其中任何一個連結

技術方面的問題
購買、樣片和IC可靠性的相關諮詢
To Top
·Before creating and producing designs and using, customers must also refer to and comply with the latest versions of all relevant TOSHIBA information and the instructions for the application that Product will be used with or for.