型號需要超過三個文字以上
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
儲存產品目錄
選擇應用
Find everything you need for your next product design. Simply select an application and click through to the block diagram to discover our semiconductor solutions.
新產品/新聞
Examples of main processing circuits that are interlocked with various systems after the occurrence of probabilities
Part number | 74VHC541FT | TC74VHC9541P |
---|---|---|
Package | TSSOP20B | DIP20 |
VCC [V] | 2.0 to 5.5 | 2.0 to 5.5 |
ICC [μA] | 4.0 | 4.0 |
IOH/L [mA] | ±8.0 (Vcc=4.5V) | ±8.0 (Vcc=4.5V) |
tPLH/HL [ns] | 3.5 (Vcc=5.0V) | 5.0 (Vcc=5.0V) |
Part number | TBD62089APG | TBD62789APG |
---|---|---|
Function | Sink output TR array +D-FF | Source output TR array +D-FF |
Outputs | 8 circuits | 8 circuits |
Inputs | CMOS input compatible | CMOS input compatible |
Output ratings | 50V | 50V |
500mA | -500mA | |
Output ON res. | 1.6Ω (typ.) | 1.4Ω (typ.) |
Clamp diode | no | yes |
Package | DIP20 | DIP20 |
Part number | TB67S285FTG | TB67S289FTG |
---|---|---|
Output withstand voltage (Abs. Max.) | 50V | |
Output current (Abs. Max.) | 3.0A | 3.0A |
Output ON-resistance (H+L) | 0.4Ω | 0.4Ω |
Control impedance | 3-wire serial | Clock input |
Step | 1/1, 1/2 | 1/1, 1/2, 1/4, 1/8, 1/16, 1/32 |
Features | AGC (step-out prevention), ADMD (high efficiency control), ACDS (detection resistor-less) | |
Error detection | overheating, overcurrent, low voltage, open load | |
Package | QFN48 |
Part number | 74VHC273FT | TC74VHC9273P |
---|---|---|
Package | TSSOP20B | DIP20 |
VCC [V] | 2.0 to 5.5 | 2.0 to 5.5 |
ICC [μA] | 4.0 | 4.0 |
IOH/L [mA] | ±8.0 (Vcc=4.5V) | ±8.0 (Vcc=4.5V) |
tPLH/HL [ns] | 5.8 (Vcc=5.0V) | 4.2 (Vcc=5.0V) |
Part number | TB67S101AFTG | TB67S105FTG | TB67S109AFTG |
---|---|---|---|
Max. output voltage | 50V | ||
Max. output current | 4.0A | 3.0A | 4.0A |
On-resistance(H+L) | 0.49Ω | 0.6Ω | 0.49Ω |
Control interface | Phase interface | 3-wire serial | Clock input |
Control step | 1/1, 1/2,, 1/4 | 1/1, 1/2 | 1/1, 1/2, 1/4, 1/8, 1/16, 1/32 |
Other feature | DIP type available | Torch control(4b) | ADMD available |
Abnormality detection | Over heat, over current, open load | ||
Package except QFN48 | HTSSOP48/SDIP24 | Only QFN48 | HSSOP48 |
Part number | TB67S141FTG | TB67S145FTG | TB67S149FTG |
---|---|---|---|
Max. output voltage | 84V | ||
Max. output current | 3.0A | ||
On-resistance(H+L) | 0.25Ω | ||
Control interface | Phase input | 3-wire serial | Clock input |
Control step | 1/1, 1/2,, 1/4 | 1/1, 1/2 | 1/1, 1/2, 1/4, 1/8, 1/16, 1/32 |
Other feature | DIP/ZIP available | Small package | High resolution u step |
Abnormality detection | Over heat, over current, under low voltage | ||
Package except QFN48 | HZIP25/SDIP24 | Only QFN48 | HZIP25/HSSOP48 |
Part number | TB67S111PG | TB67S112PG |
---|---|---|
category | Solenoid driver | Solenoid driver |
Number of output | 4 | 2 |
Output voltage rating | 84V | 50V |
1500mA | 1500mA | |
Output on-resistance | 0.35Ω(typ.) | 0.40Ω(typ.) |
Clamp diode | Available | Available |
Abnormality detection | Over-temperature Over-current |
Over-temperature Over-current |
Package | DIP16 | DIP16 |