Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

Function explanation : [Function explanation]

Simulation : [SIO serial clock frequency] [SIO output] [I2C output clock frequency] [I2C output]

Displays the waveforms when the serial bus interface is used in the SIO mode. 
After setting the output data to the SIO buffer, click the start transmission button. Then the image of the output wave forms is displayed.

Setting

RegisterSetting
SIO buffer(SCxBUF) (Input in hexadecimal.)
 

SIO output waveforms

data
clock
bit0
bit1
bit2
bit3
bit4
bit5
bit6
bit7
A new window will open