Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

Function explanation : [Function explanation]

Simulation : [SIO serial clock frequency] [SIO output] [I2C output clock frequency] [I2C output]

Displays waveforms when the serial bus interface is used in I2C mode. 
After setting slave address to first data buffer, and setting output data to 2nd data buffer, click the start transmission button. Then the image of output waveforms is displayed.

Setting

RegisterSetting
Data buffer(SBIxDBR) Address : Input in hexadecimal.
Data buffer(SBIxDBR) Data : Input in hexadecimal.
 
Simulates the transmission in the master mode.

I2C output waveforms

SCL
SDA
start
A6
A5
A4
A3
A2
A1
A0
R/W
ACK
D7
D6
D5
D4
D3
D2
D1
D0
ACK
stop
A new window will open