require 3 characters or more.
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
Select Product Categories
Select Application
Find everything you need for your next product design. Simply select an application and click through to the block diagram to discover our semiconductor solutions.
New Products / News
require 3 characters or more.
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
Part number | ||
---|---|---|
Core | Arm Cortex-A9 MPCore |
|
Maximum operating frequency | 300 MHz | 600 MHz |
FPU (Floating Point Unit) | Integrated | |
RAM | 1 MByte SRAM 32 kByte SRAM (for back-up) |
|
DRAM controller | DDR3/DDR3L×16 bit | |
External extended bus interface | Address: 27 bit, Data: 32 bit | |
Graphics accelerator | Toshiba original 2D graphics accelerator | |
LCD Controller | WVGA (800 x 480 pixel) 60 fps , 24-bit Parallel I/F | |
High speed interface controller |
USB2.0 host interface, USB2.0 device interface, 10/100 Ethernet MAC | |
Peripheral function | DMA controller, Timer/Counter, RTC | |
Peripherals | Camera I/F, UART×4, I2C×4, I2S×2, SPIM×7, SPIB×2,PWM×6, 12bitADC×4, SDIO×3, e-MMCx1, GPIO | |
Power supply voltage | Core=1.1V, I/O=3.3V | |
Package | LFBGA 310-pin, 16mm x 16mm, 0.8mm pitch | |
Status | Mass production |
TZ2100XBG | TZ2102XBG | ||
---|---|---|---|
Setting example | Use Media I/F | Use External Bus I/F | Use External Bus I/F |
CPU | Cortex®-A9 300MHz +FPU L1I$ 32kB/L1D$ 32kB, L2$ 128kB |
Cortex®-A9 600MHz +FPU L1I$ 32kB/L1D$ 32kB, L2$ 128kB |
|
Graphics | 2D Graphics (BitBLT) | - | - |
DRAM I/F | DDR3/3L x16bit | DDR3/3L x16bit | |
SRAM | 1MB Back-up 32kB |
1MB Back-up 32kB |
|
Camera I/F | 8bit Parallel Camera I/F | - | - |
External Bus I/F | - | A=27bit, D=32bit/16bit/8bit | A=27bit, D=32bit/16bit/8bit |
LCD I/F | WVGA 60fps |
- | - |
USB ※Exclusive use |
USB2.0 Host/Device 1ch(Option) | USB2.0 Host/Device 1ch | |
Ether | 10/100 Ethernet MAC | - | - |
RTC | 1 | 1 | |
SPIM(SPITX) SPIB SPIS |
- 2ch 1ch |
7ch - - |
7ch - - |
UART/PPI | 3ch | 4ch | 4ch |
PWM | 6ch | 6ch | |
I2C | 4ch | 2ch | 2ch |
I2S | 2ch | 2ch | |
Timer WDT DMAC |
32bit×9ch 1ch 8ch |
32bit×9ch 1ch 8ch |
|
ADC | 4ch | 4ch | |
SDIO/e-MMC/SD Card | 3ch | - | - |
GPIO(MAX) | 128ch(Dedicated 4ch+ Share 124ch) | 128ch(Dedicated 4ch+Share 124ch) | |
Package | BGA 310pin(16mm×16mm, 0.8mm pitch) | BGA 310pin(16mm×16mm, 0.8mm pitch) |
TZ2100 evaluation board is a development starter kit including evaluation board for TZ2100 performance evaluation, eager evaluation for software and making prototype, set with BSP(Board Support Package).
Evaluation board are lined up with 2 kinds of boards which can use camera/LCD display and can use amusement equipment interface. As for BSP, 2 types of OS can be selected depend on the customer usage.
Shipping No. | RBTZ2100-1MA-A1 |
---|---|
CPU | |
Overview | ![]() |
Dimensions | 150mm × 130mm |
Main Function |
CPU RAM ROM microSD card slot x1 Debug UART x2 (micro USB) Ethernet 10/100Mbps x1 Audio USB host/device 8-bit parallel camera I/F x1 WVGA 60-fps 24b-it parallel LCD I/F x1 Power supply DC 5.0 V |
Where to buy / rent |
Please contact to our sales division. |
Part number | OS | Distribution | Device Driver |
---|---|---|---|
RBTZ2100-1MA-A1 RBTZ2100-1MA-A2 |
Linux® (Ubuntu®14.04 Arm hf) |
gcc | Ethernet, UART, SPIB, I2C, Audio, GPIO, SPIM, USB(EHCI/OHCI), e-MMC, Memory Allocator, SD/SDIO |
μ-ITRON | µC3/Standard (eForce Co., Ltd.)*2 |
Ethernet, UART, SPIB, I2C, Audio, GPIO, SPIM, Memory Allocator, SD/SDIO | |
RBTZ2100-2MA-A2 | - | IAR Embedded Workbench EWARM (IAR Systems®)*3 | UART, GPIO, I2C, SPIM,Audio |
Stock Check & Purchase
require 3 characters or more.
* Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
* Other company names, product names, and service names may be trademarks of their respective companies.