Contact us

A new window will open A new window will open

Development System

In-Circuit Emulation System for 92CF29A/30

The RTE900/H1 In-Circuit Emulation System for 92CF29A/30 is comprised of the Integrated Development Environment, RTE900/H1 On-Chip Debug Emulator, In-Circuit Adapter, and accessories.

In-Circuit Emulation System for 92CF29A/30

  • Real-time PC/PD trace.
  • Trace control using an event feature.
  • Capable of referring to the memory during program execution.
Check the product names and numbers at this website
When purchasing a product, check the latest information at this web site. The product number of each product and the manufacturer's latest information can be checked with the search system of this web site. If the product number of your development target microcomputer is searched for, the information on the development system products will be displayed together with the detailed information on the microcomputers. The product information is also provided in "Product Numbers List" and "Comprehensive List (Microcomputers)" under "Document" for your use.
RTE900/H1 In-Circuit Emulation System for 92CF29A/30 Specifications
Host interface USB2.0 High-speed
Emulation memory Target memory
Event Number of points 8 points
Comparison items Address, data, status, external input
Comparison conditionscondition Match, unmatch, range
Pass count 1 to 256 times
Event trigger actions Break, trace control, timer control, external trigger output
Event combinations AND, OR, sequential
Hardware break 4 points
Software break 1024 points
Trace memory Capacity 256 frames (Notes-1)
Trace memory Modes Free trace, trigger trace, sampling trace
Trace items PC address, data address, data value, status, external output, external input, event
Trace overflow actions Overwriting, overwriting prohibit, break
Timer measurement Run timer: 1 channel, Lap timer: 1 channel
Memory access Memory display during program execution 64 bytes
Memory rewrite during program execution 1 address(byte/word/Long word either) (Notes-2)
Program variables Display Binary, octal, decimal or hexadecimal display can be selected for each variable.
Registration Variables, arrays, structures and unions can be registered by the elements.
Sauce display - Source
- Source + assembler code
- Source + assembler code + machine language
External output 1 line
External input 1 line
Performance analysis: Module time measurement -
Performance analysis: Coverage measurement -
Flash programming/security feature External Flash memory can be programmed during debugging.
(Notes-1) There are some cases where the trace memory capacity varies by a tracing condition or operating status.
(Notes-2) A break occurs whenever rewritten.

Product Configuration and Appearance of In-Circuit Emulation System for 92CF29A/30

Product Configuration
Product Configuration

Content of Product

RTE900/H1 On-Chip Debug Emulator
  • RTE900/H1 On-Chip Debug Emulator main body
  • Communication cable (Pre-plugged to the emulator.Note)
  • Communication connector (Note)
  • One license for downloading the Integrated Development Environment from website.
(Note) Made by Samtec,Inc.
In-Circuit Adapter
  • In-Circuit Adapter main body
  • QFP socket (QFP adapter)
  • Emulation connector (Pin protector)
  • Guide screw
  • Manual

Items to Be Prepared by Customer

  • Host system
  • USB cable (emulator side: B-type connector)
  • Target system
  • Precautions for USB Connection

    • The emulator is connected to the host system via the USB. (USB2.0 High-speed)
    • To newly connect the emulator to the host system, it is necessary to install a USB driver.

    External Dimensions

    External Dimensions

    Example of mounting In-Circuit Adapter

    Example of mounting In-Circuit Adapter

  • About Emulation Operating Voltage/Frequency

    Any operating frequency and operating voltage in the device (TMP92CF26AXBG) of In-Circuit Adapter operation assurance range is available.
    Note that the power/clock cannot be supplied from the emulator to the target system.


Example of mounting In-Circuit Adapter
Example of mounting In-Circuit Adapter

  • Communication Cable

    The communication cable is used to connect the emulator or the FLASH Writer to the target system. It is pre-plugged to the emulator or the FLASH Writer.
    The communication cable is available from Samtec, Inc. For detailed specifications, please visit Samtec, Inc. website.

    The recommended product can also be purchased from the following agencies.

    Communication Cable (Recommended)
    Name Part Number Remark
    Communication cable FFSD-10-D-07.00-01-N Pre-plugged to the emulator or the FLASH Writer

  • QFP Socket / Emulator Connector (QFP Adapter / Pin Protector)

    The QFP socket and the emulator connector is used to connect the In-Circuit Adapter to the target system.
    There is available from TOKYO ELETECH CORPORATION. For detailed specifications, please visit TOKYO ELETECH CORPORATION website.

    QFP socket / Emulator connector (QFP adapter / Pin protector)
    Name Part Number Remark
    QFP socket (QFP adapter) NQPACK176SE -
    Emulator connector (Pin protector) YQPACK176SE -
    Note: Parenthesized notations are the names in the instruction manual accompanying the product.

  • QFP Socket Cover (Top Cover for IC Package)

    The QFP socket cover is used, together with the target connector, to mount an MCU on the target system.
    The QFP socket cover is manufactured by TOKYO ELETECH CORPORATION. For information about the specification of this product, please refer to TOKYO ELETECH CORPORATION’s website.


If you have any queries, click one of these links:

Technical queries
Queries about purchasing, sampling and IC reliability
To Top
·Before creating and producing designs and using, customers must also refer to and comply with the latest versions of all relevant TOSHIBA information and the instructions for the application that Product will be used with or for.