Low-Dropout Regulators (LDO Regulators)
Toshiba offers a wide choice of LDO regulators in packages ranging from general-purpose to ultra-compact that are suitable for high-performance requirements, such as low noise, high ripple compressibility (PSRR), high output current stability (load transient response), and low current consumption, which are particularly required for state-of-the-art analog circuits. The newly developed new-generation process also significantly improves dropout characteristics and provides a high-efficiency linear regulator solution.
Lineup
You can narrow down the search for applicable products by selecting specifications.
You can narrow down your search for applicable products by package type or number of pins.
- WCSP4E
-
Package Size
W : 0.645 mm 0.025 inch L : 0.645 mm 0.025 inch H : 0.43 mm 0.017 inch
- WCSP4F
-
Package Size
W : 0.645 mm 0.025 inch L : 0.645 mm 0.025 inch H : 0.33 mm 0.013 inch
- SDFN4
-
Package Size
W : 0.8 mm 0.031 inch L : 0.8 mm 0.031 inch H : 0.38 mm 0.015 inch
- DFN4
-
Package Size
W : 1.0 mm 0.039 inch L : 1.0 mm 0.039 inch H : 0.58 mm 0.023 inch
- DFN4C
-
Package Size
W : 1.0 mm 0.039 inch L : 1.0 mm 0.039 inch H : 0.38 mm 0.015 inch
- DFN4D
-
Package Size
W : 1.0 mm 0.039 inch L : 1.0 mm 0.039 inch H : 0.37 mm 0.015 inch
- DFN5B
-
Package Size
W : 1.2 mm 0.047 inch L : 1.2 mm 0.047 inch H : 0.38 mm 0.015 inch
- SOT-553 (ESV)
-
Package Size
W : 1.6 mm 0.063 inch L : 1.6 mm 0.063 inch H : 0.55 mm 0.022 inch
- SOT-353F (UFV)
-
Package Size
W : 2.0 mm 0.079 inch L : 2.1 mm 0.083 inch H : 0.7 mm 0.028 inch
- SOT-25 (SMV)
-
Package Size
W : 2.9 mm 0.11 inch L : 2.8 mm 0.11 inch H : 1.1 mm 0.043 inch
- WCSP6F
-
Package Size
W : 1.2 mm 0.047 inch L : 0.8 mm 0.031 inch H : 0.33 mm 0.013 inch
All package dimensions are guaranteed in millimeters as mentioned on datasheet. Package dimension in inches is round to 2 significant digits converted with 1mm=0.0393701inch.
require 3 characters or more.
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
Technical Articles
Documents
Technical topics
Applications
Reference Design
Questions about purchasing, sampling and IC reliability
Stock Check & Purchase
require 3 characters or more.