Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

CLOCK Input Type

CLOCK input type

The timing chart for each excitation mode of CLOCK input type is shown below.

In the CLOCK input type, the motor is controlled by two types of signals, a clock and a directional signal.
So you can easily control the motor speed by the clock speed, the motor rotation amount by the number of clocks, and the motor rotation direction by the rotation direction signal.

Chapter 4 Stepping Motor Driver ICs

Two Input Types
PHASE Input Type
A new window will open