DIY Car build guide using the evaluation board of brushed DC motor driver IC TB67H450FNG. It describes components used, block diagram, software configuration, etc.
|TB67H450FNG||PWM Chopper Type DC Brushed Motor Driver|
|System power supply||5V Li-ion battery|
|Motor specifications||General use brushed DC motor|
|MCD Board||TB67H450FNG Evaluation Board (MIKROE-3982)|
|MCD control method||PWM Control (Arduino Nano is used for controlling system and generating PWM signals.)|
“Design・Document” contains the documents listed below.
|Part Number||Device Category||Portion Usage||Description|
|TB67H450FNG||Brush Motor Driver IC||2 pcs||TB67H450FNG is a PWM chopper type DC brushed motor driver IC.
Fabricated with the BiCD process, the TB67H450FNG is rated at 50V output voltage with maximum current of 3.5A.