-
My ToshibaSemicon
- General Top View
-
SEMICONDUCTOR View
-
Applications
Body Electronics
xEV
In-Vehicle Infotainment
Advanced Driver-Assistance Systems (ADAS)
Chassis
Infrastructure
BEMS/HEMS
Factory Automation
Commercial Equipment
IoT Equipment
Healthcare
Wearable Device
Mobile
Computer Peripherals
-
Products
Products
-
Design & Development
Design & Development
Innovation Centre
At the Toshiba Innovation Centre we constantly strive to inspire you with our technologies and solutions. Discover how to place us at the heart of your innovations.
-
Knowledge
Knowledge
Highlighted Topics
Further Materials
Other
- Where To Buy View
-
- STORAGE View
- COMPANY View
- Part Number Search
- Cross Reference Search
- Keyword Search
- Parametric Search
- Stock Check & Purchase
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
require 3 characters or more.
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
require 3 characters or more.
What is the dynamic impedance of a Zener diode (voltage regulator diode, constant voltage diode)?
Zener impedance is the equivalent series resistance of a Zener diode when it is conducting current. Zener impedance should ideally be zero, but in reality, a Zener diode has some impedance. Thus, a Zener diode acts as such only in a limited current range.
A Zener diode is a type of diode designed to use Zener breakdown in the reverse-biased state. Reverse current suddenly increases at Zener voltage. In other words, Zener voltage is only slightly dependent on reverse current. Still, Zener voltage changes in response to a change in current. The rate of this change is specified as dynamic impedance.
Zener diodes exhibit higher impedance than the specified dynamic impedance in the lower and higher current regions as shown Fig. 1. In these regions, Zener voltage might change considerably in response to a change in current or temperature. Care should be exercised when Zener diodes are used in constant-voltage circuits.
Related Links
For products, please refer to the following links.
