Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

Select Application

Find everything you need for your next product design. Simply select an application and click through to the block diagram to discover our semiconductor solutions.

New Products / News

Innovation Centre

At the Toshiba Innovation Centre we constantly strive to inspire you with our technologies and solutions. Discover how to place us at the heart of your innovations.

Increased efficiency and increased current through multi-chip modules with built-in MOSFET

Approx. 36% reduction in loss compared to the previous device

Multi-chip module products use a MOSFET with built-in body diodes with fast reverse recovery times (trr) suitable for motors. The latest products have achieved high efficiency by reducing losses by approximately 38% compared with conventional products in sine wave drive. Our products are aligned with the rated current of 5 A in small-surface packages (SSOP30) of 20 x 14.2 × 2.2 mm. In addition, the source terminals of each phase are individually separated. By combining them with our microcomputers (MCUs) and motor drivers (MCDs), we can cope with sensorless control such as vector control using the three-shunt method.

The latest products have low on-resistance, and are equipped with a 600-V-breakdown-voltage super-junction MOSFET (SJMOS) with a built-in body diode (HSD: High Speed Diode) with a fast reverse-recovery-time (trr), which has been on the market for many years. As a result, the sine-wave drive is approximately 1.8 W (@input power = 40 W) compared with conventional products and highly efficient, reducing losses by approximately 38%.

Multi-chip module 3-Phase Brushless DC Motor Driver ICs

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs

Queries about purchasing, sampling and IC reliability

Stock Check & Purchase

keyword:

Related information

A new window will open