This page partially uses JavaScript. This page may not operate normally when these functions are not supported by your browser or the setting is disabled.
Please look for the information you need from the following pages:

Asia-Pacific - English

Asia-Pacific - 简体中文

Asia-Pacific - 繁體中文

Asia-Pacific - 한국어

Asia-Pacific - 日本語

Americas - English

Europe (EMEA) - English

M360 Group Sample Software

This page provides a sample software download service for the M360 group.

TMPM361/362/363/364

Please check the function list, and download the appropriate file.

Function list

Function list for sample software.

Sample Software/Function		Description	Product Name
Sample Software/Function		Description	TMPM 361	TMPM 362	TMPM 363	TMPM 364
Analog/Digital converter	ADC	Example of reading ADC data from analog input pins	V	V	V	V
CAN controller	CAN	Example of the test loop back mode, such as mailbox message setting, mailbox configuration, message transmission/receiving, mode change (test loop back mode) status getting and usage for interrupt			V	V
CEC function	CEC	Example of CEC transmission / reception interrupt	V	V	V	V
Clock/Mode control	CG	Switching example between NORMAL mode and SLEEP mode	V	V	V	V
DMA controller	DMAC	Example of DMAC settings and data transfer between the memories	V	V	V	V
Flash control	FLASH	Example of running a program in the internal RAM and performing delete and rewrite of the internal flash memory	V	V	V	V
I/O port	GPIO	Usage example of Port using LEDs and KEYs	V	V	V	V
Key-on wakeup	KWUP	Example of enter and release low power mode	V	V	V	V
Remote control signal preprocessor	RMC	Example of receiving the signals of remote control and decode	V	V	V	V
Real-time clock	RTC	Configuration example for date and time	V	V	V	V
Serial bus interface	SBI	Example of transmission / reception in I²C bus mode	V	V	V	V
Static memory controller	SMC	Example of SRAM initialization	V	V	V	V
Serial channel	SIO/UART	Example of UART configuration and transmission	V	V	V	V
Synchronized serial interface	SSP	Configuration example for SSP and self-loop back	V	V	V	V
16-bit timer	TMRB	Example of timer interrupt that runs every 500 ms Output example of duty-variable PPG (programmable square wave)	V	V	V	V
Watchdog timer	WDT	Example of the detection time and the processing after the detection for watchdog timer	V	V	V	V

Download

Please Select the appropriate file for download.

select all

Name
TMPM361 (ZIP:3.8MB) v2.3.1
TMPM362 (ZIP:3.8MB) v2.3.1
TMPM363 (ZIP:3.8MB) v2.3.1
TMPM364 (ZIP:3.8MB) v2.3.1

select all

Product Page

M360 Group

TMPM365/366

Please check the function list, and download the appropriate file.

Function list

Function list for sample software.

Sample Software/Function		Description	Product Name
Sample Software/Function		Description	TMPM 365	TMPM 366
Analog/Digital converter	ADC	Example of reading ADC data from analog input pins	V	V
Clock/Mode control	CG	Switching example between NORMAL mode and STOP mode	V	V
DMA controller	DMAC	Example of DMAC settings and data transfer between memory and peripheral devices using the UART	V	V
External bus interface	EXB	Example of read / write of the SRAM that is connected to the external bus		V
Flash control	FLASH	Example of running a program in the internal RAM and performing delete and rewrite of the internal flash memory	V	V
Asynchronous Serial Channel	FUART	This program sends 64 different data values from TX pin and receives data from RX pin.		V
I/O port	GPIO	Usage example of Port using LEDs and KEYs	V	V
Serial bus interface	SBI	Example of transmission / reception in I²C bus mode	V	V
Serial channel	SIO/UART	Example of UART configuration and transmission	V	V
Synchronized serial interface	SSP	Configuration example for SSP and self-loop back		V
16-bit timer	TMRB	Example of timer interrupt that runs every 500 ms Output example of duty-variable PPG (programmable square wave)	V	V
USB Device Controller	USBD	HID (Human Interface Device) Mouse Demo Once the evaluation board is connected via USB interface to PC and then powered on , it will be recognized as a standard USB mouse and then it controls the arrow icon on PC screen as shown below, and this process will be repeated 3 times	V	V
		CDC (communication device class) Loopback Demo On the evaluation board, a simple CDC demonstration program was designed to serve as a COM device in a simulation.	V	V
		MSC (Mass Storage Class) RAM disk Demo Once the evaluation board is connected via USB interface to PC and then powered on, it will recognize 24 k RAM Disk. You can format it by the computer and save files to it.	V	V
Watchdog timer	WDT	Example of the detection time and the processing after the detection for watchdog timer	V	V

Download

Please Select the appropriate file for download.

select all

Name
TMPM365 (ZIP:4.6MB) v2.3.1
TMPM366 (ZIP:5.3MB) v2.3.1

select all

Product Page

M360 Group

TMPM367/368/369/36B

Please check the function list, and download the appropriate file.

Function list

Function list for sample software.

Sample Software/Function		Description	Product Name
Sample Software/Function		Description	TMPM 367	TMPM 368	TMPM 369	TMPM 36B
Analog/Digital converter	ADC	Example of reading ADC data from analog input pins	V	V	V	V
CAN controller	CAN	Example of the test loop back mode, such as mailbox message setting, mailbox configuration, message transmission/receiving, mode change (test loop back mode) status getting and usage for interrupt		V	V
Clock/Mode control	CG	Switching example between NORMAL mode and IDLE/STOP1/STOP2 mode	V	V	V	V
Digital/Analog converter	DAC	Output example of sawtooth waveform from the DA pin	V	V	V
External bus interface	EXB	Example of read / write of the SRAM that is connected to the external bus	V	V	V	V
Encoder Input Circuit	ENC	This example detects the rolling of mouse wheel.	V	V	V	V
Flash control	FLASH	Example of running a program in the internal RAM and performing delete and rewrite of the internal flash memory	V	V	V	V
Asynchronous Serial Channel	FUART	This program sends 64 different data values from TX pin and receives data from RX pin.	V	V	V	V
I/O port	GPIO	Usage example of Port using LEDs and KEYs	V	V	V	V
Multi-Purpose Timer	IGBT	This example program demonstrates how to use external trigger to control the PPG output by IGBT driver and EMG function.	V	V	V	V
Multi-Purpose Timer	PMD	This example demonstrates the phase outputs.	V	V	V	V
Low Voltage Detection Circuit	LVD	If Voltage is higher than the detection voltage, UART displays "UPPER". When Voltage is lower than the detection voltage, UART displays "LOWER".	V	V	V	V
Oscillation frequency detection	OFD	Example of generate a reset for I/O, when the clock exceeds the OFD detection frequency range	V	V	V	V
Remote control signal preprocessor	RMC	Example of receiving the signals of remote control and decode	V	V	V	V
Real-time clock	RTC	Configuration example for date and time	V	V	V	V
Serial bus interface	SBI	Example of transmission / reception in I²C bus mode	V	V	V	V
Serial channel	SIO/UART	Example of UART configuration and transmission	V	V	V	V
Synchronized serial interface	SSP	Configuration example for SSP and self-loop back	V	V	V	V
16-bit timer	TMRB	Example of timer interrupt that runs every 500 ms Output example of duty-variable PPG (programmable square wave)	V	V	V	V
μDMA controller	uDMAC	Example of DMAC settings and data transfer between the memories	V	V	V	V
USB Device Controller	USBD	HID (Human Interface Device) Mouse Demo Once the evaluation board is connected via USB interface to PC and then powered on , it will be recognized as a standard USB mouse and then it controls the arrow icon on PC screen as shown below, and this process will be repeated 3 times	V	V	V
		CDC (communication device class) Loopback Demo On the evaluation board, a simple CDC demonstration program was designed to serve as a COM device in a simulation.	V	V	V
		MSC (Mass Storage Class) RAM disk Demo Once the evaluation board is connected via USB interface to PC and then powered on, it will recognize 24 k RAM Disk. You can format it by the computer and save files to it.	V	V	V
Watchdog timer	WDT	Example of the detection time and the processing after the detection for watchdog timer	V	V	V	V

Download

Please Select the appropriate file for download.

select all

Name
TMPM367 (ZIP:7.1MB) v2.3.1
TMPM368 (ZIP:7.2MB) v2.3.1
TMPM369 (ZIP:7.2MB) v2.3.1

select all

Product Page

M360 Group

Contacts

Technical inquiry

Frequently Asked Questions

FAQs

A new window will open

Automotive Category Top

Body Electronics

xEV

In-Vehicle Infotainment

Advanced Driver-Assistance Systems (ADAS)

Chassis

Industrial Equipment Category Top

Infrastructure

BEMS/HEMS

Factory Automation

Commercial Equipment

Consumer / Personal Equipment Category Top

IoT Equipment

Healthcare

Wearable Device

Mobile

Computer Peripherals

Home Applicances

M360 Group Sample Software

TMPM361/362/363/364

Function list

Download

TMPM365/366

Function list

Download

TMPM367/368/369/36B

Function list

Download

Contacts

Technical inquiry