Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

Engine block/Heater block/Finisher block

Engine block/Heater block/Finisher block

Lineup

MCU (TX03 Series M360 Group)

Part number TMPM368FDFG
Maximum operation frequency 80 MHz
Instruction ROM 512 KB
RAM 128 KB
Timer 16bit x 8ch
ADC 8ch x 12bit
USB Host 1ch, Device 1ch
CAN, UART/SIO 1ch, 4ch

Stepping motor driver

Part number TB67S511 TB67S512 TB67S521 TB67S522
Output withstand voltage 40V (Abs. Max.)
Output current 2.0A (Abs. Max.) 2.8A (Abs. Max.)
Output ON-resistance (H+L) 0.8Ω 0.53Ω
Driving type PWM constant current drive
Excitation mode 2-phase, 1-2 phase, W1-2 phase
Features Phase type Clock type Phase type Clock type
Error detection function UISD,TSD ,POR
Package QFN36

MCU (TX03 Series M380 Group)

Part number TMPM380FWFG
Maximum operation frequency 40 MHz
Instruction ROM 128 KB
RAM 12 KB
3-phase PWM output 2ch
Timer 16bit x 8ch
I2C/SIP 2ch
ADC 18ch (12bit)

Three-phase brushless motor controller

Part number TC78B004AFTG
Power supply voltage (operating range) [V] 10 to 28
Output voltage (operating range) [V] -0.3 to 40 (upper side drive), 15 (Lower side drive)
Drive system Sine wave PWM drive system
Other / Features

Lead angle control: Automatic lead angle correction function

Sensor input: Hall element

Speed control : External clock input, FLL + PLL speed control circuit

Lock protection function

1ch Brushed DC Motor Driver

Part number TB67H450FNG / TB67H451FNG
Motor type Brushed DC motor
Output voltage [V] 50
Output current [A] 3.5
Output ON resistance [Ω]

0.6

Output circuit 1 circuit
Abnormality detection function Over heat, over current, low voltage
Package HTSSOP8

2ch Brushed DC Motor Driver

Part number TB67H400AFTG TB67H410FTG TB67H420FTG
Motor type Brushed DC motor
Output voltage [V] 50
Output current (Normal) [V] 4.0 2.5 4.5
Output  current (Large) [A]

8.0

5.0 9.0
Output on-resistance (Normal) [Ω] 0.49 0.8 0.33
Output on-resistance (Large) [Ω] 0.25 0.4 0.17
Abnormality detection function Over heat, over current, low voltage
Package QFN48

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs
A new window will open