Cross Reference Search
require 3 characters or more.
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
Keyword Search
Parametric Search
Stock Check & Purchase
Select Product Categories
Select Application
Find everything you need for your next product design. Simply select an application and click through to the block diagram to discover our semiconductor solutions.
New Products / News
Design & Development
Innovation Centre
At the Toshiba Innovation Centre we constantly strive to inspire you with our technologies and solutions. Discover how to place us at the heart of your innovations.
Knowledge
Highlighted Topics
Further Materials
Engine block/Heater block/Finisher block
Lineup
MCU
| Series | Group | Function |
|---|---|---|
| TX03 Series | M376 Group | Arm® Cortex®-M3, 80 MHz operation frequency (Max). |
| TX04 Series | M460 Group | Arm® Cortex®-M4, 120 MHz operation frequency (Max). |
| TXZ+™4A Series | M4G Group | Arm® Cortex®-M4, 200 MHz operation frequency (Max). |
* Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
* TXZ+™ is a trademark of Toshiba Electronic Devices & Storage Corporation.
Stepping motor driver
| Part number | TB67S511 | TB67S512 | TB67S521 | TB67S522 |
|---|---|---|---|---|
| Output withstand voltage | 40V (Abs. Max.) | |||
| Output current | 2.0A (Abs. Max.) | 2.8A (Abs. Max.) | ||
| Output ON-resistance (H+L) | 0.8Ω | 0.53Ω | ||
| Driving type | PWM constant current drive | |||
| Excitation mode | 2-phase, 1-2 phase, W1-2 phase | |||
| Features | Phase type | Clock type | Phase type | Clock type |
| Error detection function | UISD,TSD ,POR | |||
| Package | QFN36 | |||
MCU (TX03 Series M380 Group)
| Part number | TMPM380FWFG |
|---|---|
| Maximum operation frequency | 40 MHz |
| Instruction ROM | 128 KB |
| RAM | 12 KB |
| 3-phase PWM output | 2ch |
| Timer | 16bit x 8ch |
| I2C/SIP | 2ch |
| ADC | 18ch (12bit) |
Three-phase brusheless DC motor controller
| Part number | TC78B004AFTG |
|---|---|
| Power supply voltage (operating range) [V] | 10 to 28 |
| Output voltage (operating range) [V] | -0.3 to 40 (upper side drive), 15 (Lower side drive) |
| Drive system | Sine wave PWM drive system |
| Other / Features | Lead angle control: Automatic lead angle correction function Sensor input: Hall element Speed control : External clock input, FLL + PLL speed control circuit Lock protection function |
1ch Brushed DC Motor Driver
| Part number | TB67H450FNG / TB67H451FNG |
|---|---|
| Motor type | Brushed DC motor |
| Output voltage [V] | 50 |
| Output current [A] | 3.5 |
| Output ON resistance [Ω] | 0.6 |
| Output circuit | 1 circuit |
| Abnormality detection function | Over heat, over current, low voltage |
| Package | HTSSOP8 |
2ch Brushed DC Motor Driver
| Part number | TB67H400AFTG | TB67H410FTG | TB67H420FTG |
|---|---|---|---|
| Motor type | Brushed DC motor | ||
| Output voltage [V] | 50 | ||
| Output current (Normal) [V] | 4.0 | 2.5 | 4.5 |
| Output current (Large) [A] | 8.0 |
5.0 | 9.0 |
| Output on-resistance (Normal) [Ω] | 0.49 | 0.8 | 0.33 |
| Output on-resistance (Large) [Ω] | 0.25 | 0.4 | 0.17 |
| Abnormality detection function | Over heat, over current, low voltage | ||
| Package | QFN48 | ||
A new window will open