Cross Reference Search
require 3 characters or more.
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
Keyword Search
Parametric Search
Stock Check & Purchase
Products
Design & Development
Innovation Centre
At the Toshiba Innovation Centre we constantly strive to inspire you with our technologies and solutions. Discover how to place us at the heart of your innovations.
Knowledge
Highlighted Topics
Further Materials
Scanner block
Example of Load Switch Circuit for ON/OFF Control of LEDs for Scanner Light Source
Lineup
Small signal MOSFET
| Part number | SSM3K35FS | SSM3K35AFS | SSM3J35FS | SSM3J35AFS | |
|---|---|---|---|---|---|
| Package | SSM | SSM | SSM | SSM | |
| VDSS [V] | 20 | 20 | -20 | -20 | |
| ID [A] | 0.18 | 0.25 | -0.1 | -0.25 | |
RDS(ON)[Ω] @|VGS|=2.5 V |
Typ. | 2 | 1.1 | 5.6 | 1.5 |
| Max | 4 | 1.6 | 11 | 2.1 | |
| Polarity | N-ch | N-ch | P-ch |
P-ch | |
MCU (TXZ+TM3A Series M3H Group / TX04 Series M460 Group / TXZ+TM4A Series M4G / M4N Group)
| Series | Group | Function |
|---|---|---|
| TXZ+™3A Series | M3H Group | Arm® Cortex®-M3, 120 MHz operation frequency (Max). |
| TX04 Series | M460 Group | Arm® Cortex®-M4, 120 MHz operation frequency (Max). |
| TXZ+™4A Series | M4G / M4N Group | Arm® Cortex®-M4, 200 MHz operation frequency (Max). |
Stepping motor driver built-in AGC
| Part number | TB67S128FTG | TB67S289FTG | |
|---|---|---|---|
| Absolute Maximum Ratings | Output voltage | 50 V | |
| Output current | 5.0 A | 3.0 A | |
| On-resistance (H+L) | 0.25 Ω (Typ.) | 0.4 Ω (Typ.) | |
| Control interface | Clock / serial | Clock input | |
| Step | 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 | 1/1, 1/2, 1/4, 1/8, 1/16, 1/32 | |
| Features | ADMD (high efficiency control at high speed rotation) ACDS (built-in sense resistor less current control architecture) |
||
| Error detection function | TSD, ISD, POR, OPD | ||
| Package | VQFN64 | VQFN48 | |
Linear image sensor (CCD)
| Part Number | TCD2569BFG |
|---|---|
| Pixel Size | 5.25 μm by 5.25 μm |
| Line Spacing (Line Distance) | 2 line spacing (10.5 μm) |
| Effective Pixel Number | 5340 pixels by 3 lines |
| Sensitivity (A light source + CM500S) (Typ.) | Red: 13.2 V/(lx·s); Green: 15.0 V/(lx·s); Blue: 5.9 V/(lx·s) |
| Maximum Clock Pulse Frequency | 35 MHz |
| Power Supply Voltage (Operating Range) | 9.5 to 10.5 V |
| Maximum Output Voltage (Max) | 1.8 V |
| Saturation Output Voltage of CCD Shift Register (Min) | 4.0 V |
| Features | Sample and Hold Circuit; Clipping Function; Clamp Circuit |
| Part Number | TCD2726DG | |
|---|---|---|
| Pixel Size | 4.7 μm by 4.7 μm | |
| Line Spacing (Line Distance) | 2 line spacing (9.4 μm) | |
| Effective Pixel Number | 7500 pixels by 3 lines | |
| Sensitivity (A light source + CM500S) (Typ.) | Red: 11.1 V/(lx·s); Green: 14.9 V/(lx·s); Blue: 5.2 V/(lx·s) | |
| Maximum Clock Pulse Frequency | 100 MHz (50 MHz × 2 ch) | |
Power Supply Voltage (Operating Range) |
3.3 V (Digital) | 3.1 to 3.5 V |
| 3.3 V (Analog) | 3.1 to 3.5 V | |
| 10 V | 9.5 to 10.5 V | |
| Features | Timing Generator circuit, CCD driver | |
* Arm and Cortex are registered trademarks of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
* TXZ+™ is a trademark of Toshiba Electronic Devices & Storage Corporation.
A new window will open