Low dynamic resistance

Electrastatic  absorption
Electrastatic absorption

The TVS diode (ESD protection diode) is connected in parallel to the signal line, the power supply line, and the GND line in order to protect the circuits in the subsequent stages. The applied ESD flows through the TVS diode to the GND line. However, since the TVS diode has its own resistive component (dynamic resistance), if this resistive component is large, the ESD will not flow easily. The lower the dynamic resistance, the easier it is to absorb ESD.

ESD Pulse Absorption Performance
ESD Pulse Absorption Performance

The Lowlow-capacitance TVS-diode DF2BxM5 series (EAP-V)・DF2BxM4 series (EAP-IV)) has reduced dynamic resistances compared to with the conventional DF2BxM2 series (EAP-II). This increases the absorption performance of ESD and also reduces the clamping voltage, thereby improving the protection performance of electronic equipment.

Low dynamic resistance TVS diodes

Related information

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs

Queries about purchasing, sampling and IC reliability

Stock Check & Purchase

keyword:

Click this link to check inventory of TOSHIBA parts available at those distributors of Toshiba Electronics Europe GmbH ("TEE") who participate in netCOMPONENTS electronic components sourcing database. By clicking “click here to purchase” above, you will be opening a new browser window and leave our website to the each distributor's page. Please note that TEE provides this link solely as a convenience and for informational purposes only. By providing the link TEE does not guarantee availability of TOSHIBA part(s) as presented on the each distributor's page. TEE bears no responsibility for the accuracy or content of this external site. All information on this StockCheck page about TOSHIBA parts and their availability are provided by the netCOMPONENTS electronic components sourcing database.
A new window will open