Low dynamic resistance

Electrastatic  absorption
Electrastatic absorption

The TVS diode (ESD protection diode) is connected in parallel to the signal line, the power supply line, and the GND line in order to protect the circuits in the subsequent stages. The applied ESD flows through the TVS diode to the GND line. However, since the TVS diode has its own resistive component (dynamic resistance), if this resistive component is large, the ESD will not flow easily. The lower the dynamic resistance, the easier it is to absorb ESD.

ESD Pulse Absorption Performance
ESD Pulse Absorption Performance

The Lowlow-capacitance TVS-diode DF2BxM5 series (EAP-V)・DF2BxM4 series (EAP-IV)) has reduced dynamic resistances compared to with the conventional DF2BxM2 series (EAP-II). This increases the absorption performance of ESD and also reduces the clamping voltage, thereby improving the protection performance of electronic equipment.

Low dynamic resistance TVS diodes

Related information

문의

기술 문의

문의

문의

자주 있는 문의

자주 있는 문의

Queries about purchasing, sampling and IC reliability

재고 확인 및 구매

keyword:

Disclaimer for External Link
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.