Low dynamic resistance

Electrastatic  absorption
Electrastatic absorption

The TVS diode (ESD protection diode) is connected in parallel to the signal line, the power supply line, and the GND line in order to protect the circuits in the subsequent stages. The applied ESD flows through the TVS diode to the GND line. However, since the TVS diode has its own resistive component (dynamic resistance), if this resistive component is large, the ESD will not flow easily. The lower the dynamic resistance, the easier it is to absorb ESD.

ESD Pulse Absorption Performance
ESD Pulse Absorption Performance

The Lowlow-capacitance TVS-diode DF2BxM5 series (EAP-V)・DF2BxM4 series (EAP-IV)) has reduced dynamic resistances compared to with the conventional DF2BxM2 series (EAP-II). This increases the absorption performance of ESD and also reduces the clamping voltage, thereby improving the protection performance of electronic equipment.

Low dynamic resistance TVS diodes

Related information

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs

Queries about purchasing, sampling and IC reliability

Stock Check & Purchase

keyword:

Click this link to check inventory of TOSHIBA parts available at those distributors of Toshiba America Electronic Components, Inc. ("TAEC") who participate in netCOMPONENTS electronic components sourcing database. Please note that TAEC is providing this link solely as a convenience. All quantities listed in inventory are subject to change and information provided in this page does not guarantee availability of product(s), please check with Distributor before relying on the quantities listed. In order to guarantee availability you must place an order with one of Toshiba’s distributors.
A new window will open