Asia-Pacific
English
简体中文
繁體中文
한국어
日本語
Americas
English
Europe (EMEA)
English



부품 번호 검색

상호 참조 검색

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

키워드 검색

파라미터 검색

재고 확인 및 구매

Detail of camera motion section

Details of power supply circuit 2 / SD card section

Lineup

LENS control MCU

Part number TMPM342FYXBG TMPM343FDXBG / TMPM343F10XBG
Package VFBGA142 VBGA162
Package size 7 x 7 mm, 0.5 mm pitch
CPU Arm® Cortex®-M3, Max operation 40 MHz Arm® Cortex®-M3, Max operation 50 MHz
Memory

Flash ROM256KB

SRAM 32 KB

Flash ROM512 KB / 1 MB

SRAM 48 KB+32 KB / 64 KB+32 KB

Features 7bit resolution micro step function, PSC(342: 1 unit, 343: 4 unit), 2-phase pulse counter (342: 2ch, 343: 3ch), H-SW driver(342: 7.5ch, 343: 8ch), Micro step unit(342: 2 unit, 343: 3 unit)

Stepping motor & Brushed DC motor driver

Part number TC78S121FNG / TC78S121FTG TC78S122FNG / TC78S122FTG
Package HTSSOP48 / QFN48
Package size [mm] 12.5 x 8.1 x 1.2 mm / 7 x 7 x 0.9 mm
Maximum ratings 40 V / 2.0 A
Low on resistor output (sum of 2 Tr) 0.6 Ω
Functions

-Over limit current detection, over heat detection and power on reset

-2 lineup supports clock input for stepping motor control and phase input

-Single power supply without 5 V input

Stepping motor & Brushed DC motor driver

Part number TC78H670FTG TC78H660FNG TC78H660FTG
VM (Max. Rating) [V] 18 18 18
IOUT (Max. Rating) [A] 2.0 2.0 2.0
Ron(upper and lower sum) (Typ.) [Ω] 0.48 0.48 0.48
Control Interface IN/PHASE inputs IN/PHASE inputs IN/PHASE inputs
Step 2phase/1-2phase
excitation
2phase/1-2phase
excitation
2phase/1-2phase
excitation
Motor driving voltage 2.5 V (Min)
RS resister less
2.5 V (Min)
RS resister less
2.5 V (Min)
RS resister less
Abnormality detection function Thermal shutdown, Over current, Under voltage lockout, load open Thermal shutdown, Over current, Under voltage lockout Thermal shutdown, Over current, Under voltage lockout
Package VQFN16 TSSOP16 VQFN16

Stepping motor driver

Part number

TB67S539FTG

Absolute Maximum Ratings

Output withstand voltage

40 V

Output current

2.0 A

Output on-resistance (H+L)

0.8 Ω

Driving type

PWM constant current drive

Excitation mode

full, half, quarter, 1/8, 1/16 and 1/32 step resolutions

Features

Clock type

Error detection function

TSD, ISD, UVLO

Package

VQFN32

Stepping motor & Brushed DC motor driver

Part number TC78H653FTG
Package VQFN16
Package size 3.0 x 3.0 x 0.9 mm
Maximum ratings 8 V / 4.0 A
Low on resistor output (Total Tr) 0.22 Ω
Functions

•Thorough current preventing function 

•Over current detection  (ISD), thermal shutdown (TSD) and under voltage lockout (UVLO)

문의

기술 문의

문의

문의

자주 있는 문의

자주 있는 문의