Asia-Pacific
English
简体中文
繁體中文
한국어
日本語
Americas
English
Europe (EMEA)
English



Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Innovation Centre

At the Toshiba Innovation Centre we constantly strive to inspire you with our technologies and solutions. Discover how to place us at the heart of your innovations.

M4K Group Sample Software

This page provides a sample software download service for the M4K group.

Motor Control Sample Software

MCU Motor Studio

Motor Software Development Kit for CLICKER 4 FOR TMPM4K

MCU Motor Studio Description
Motor Control PC Tool
  • Initial parameter configuration: Motor, Board, System
  • Dynamic change of motor, sytem and PI parameters: The Digital Storage Oscilloscope (DSO) allows logging of various system, motor and control parameter
  • Runtime parameter inspections, tuning and recording
Motor Control Firmware
  • Sinewave Commutaion & Field Oriented Control (Vector Control)
  • Speed, Torque, Position control method including sensor-less and 1/3-Shunt current detection scheme
  • Error detection: over current, over voltage, under voltage, motor disconnection & field stall
Name

MCU board: Clicker 4 for TMPM4K

Inverter board: Clicker 4 Inverter Shield

Brushless DC Motor Control

Motor Software Development Kit for SBK-M4KN-KIT

Function Description
Brushless DC Motor Control with Vector Engine
  • Control the direction of motor rotation
  • Switch the motor modulation method (DPWM, CPWM)
  • Motor speed control by slide switch
  • Analog output from DAC for evaluation
  • Inverter board temperature detection with thermistor
Name

TMPM4KN Development Kit: SBK-M4KN-KIT

Peripheral Sample Software

Basic operation of peripherals

Sample Software/Function Description
Advanced Encoder Input Circuit A_ENC32 The rotation is detected by the rotary encoder in the encoder mode. The LED blink frequency depends on the count value.
Analog/Digital Converter ADC A program that will display the value , which is measured voltage from a potentiometer.
Clock/Mode Control CG Switch to the Low Power Consumption Mode (IDLE/STOP1) by the push SW port input as a trigger. Turn on and off the LED depending on the Operation Mode.
CRC CRC Communication with CRC code is added between 2 TSPIs and the received data is output to terminal software.
Digital Noise Filter DNF This sample software detects the external interrupt signal that is generated by the switch via the DNF.
Serial Bus Interface El2C/I2C Sample software is communication sample between 2 evaluation boards. And multi master sample software that read EEPROM using 2 evaluation boards.
Flash Control FLASH 1. Example of running a program in the internal RAM and performing delete and rewrite of the internal flash memory
2. Example of rewriting the data flash memory and the user information area of code flash memory
3. Examples of setting the protection function for the page and/or the block of code flash memory
Voltage Detection Circuit LVD This sample software compares the supply voltage with the detection voltage.
Oscillation Frequency Detector OFD This sample software detect error of external high speed oscillator by compare to set frequency width.
I/O port PORT Key presses are determined by polling process to turn on (turn off) the LED.
RAM Parity RAMP Add RAM parity to the character string input using the write command from the terminal software and save it in the RAM. Do a parity check on the data saved in RAM with the Read command and display it to the terminal software.
Clock Selective Watchdog Timer SIWDT Example in which an NMI interrupt occurs and an example in which the clear code is periodically written and an NMI interrupt does not occur.
32-bit Timer Event Counter T32A 1. A clock frequency input from outside is measured using the capture function
2. Example of using the timer interrupt to turn on / off the LED every second
3. Output example of duty-variable PPG (programmable square wave)
Trimming Circuit TRM The frequency of the internal high-speed oscillator is adjusted using an external reference signal.
Serial Peripheral Interface  TSPI It communicates using 2 ch TSPI and outputs data to terminal software.
Asynchronous Serial Communication Circuit
UART 1. Example of receiving the character string from a terminal emulato
2. Example of sending the character string to a terminal emulator
Name

MCU Evaluation Board:SBK-M4KN

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs