- 부품 번호 검색
- 상호 참조 검색
- 키워드 검색
- 파라미터 검색
- 재고 확인 및 구매
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
3글자 이상 입력하세요.
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
3글자 이상 입력하세요.
LDO Regulator TCR3UG Series Application for Power Supply of IoT Devices
This reference design provides document with low consumption current, PSRR, and dynamic response.The LDO has small package, low consumed power, and fast load transient response.
Description
- The TCR3UG series have compatibility with low consamption current (low quiscent current and low stand-by current) and fast load transient response, qnd these devices are ideal for battery drive IoT devices that require low power consumption.
- This voltage regulators have 31 output voltage linups from 0.8 V to 5.0 V.
- As small ceramic input and output capacitors can be used with the TCR3UG series.
Features
- Ultra small package WCSP4F (0.645 mm x 0.645 mm (typ.), t: 0.33 mm (max))
- Low quiescent bias current IB = 0.34 μA (up to 1.5V Output products, typ.) @IOUT = 0 mA
- Wide range output voltage (VOUT = 0.8 V to 5.0 V)
- High ripple rejection ratio 70 dB (0.8V Output product, typ.)@1 kHz
- Fast load transient response ±60 mV (0.8V Output product, typ.) @1 mA⇔50 mA, COUT = 1 μF
- Low dropout voltage VDO = VIN - VOUT = 155 mV (3.3V Output product, typ.) @IOUT = 300 mA
- Overcurrent protection function
- Thermal shutdown function
- Built-in auto-discharge function (TCR3UGxxA series) / Not-built-in auto-discharge function (TCR3UGxxB series)
- Inrush current reduction function ( output voltage soft start )
Reference design files
Design, Document
“Design・Document” contains the documents listed below.
Design, File
“Design・File” contains the contents listed below.
Toshiba items
| Part Number | Device Category | Portion Usage | Description |
|---|---|---|---|
| TCR3UGxx* | LDO Regulator | 1 | Output voltage lineups 0.8 to 5.0V, IB=0.34 μA(typ.)/WCSP4F |