This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
3글자 이상 입력하세요.
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
3글자 이상 입력하세요.
An electronic system consists of multiple ICs and circuits. For the system to work properly, it is necessary to set a power supply sequence, i.e., the order in which to supply power to the constituent ICs and circuits. A relatively large capacitor is connected to the VOUT pin of an LDO regulator in order to smooth the output voltage. After the LDO regulator is turned off, this smoothing capacitor remains charged for a while, depending on the supply current of the subsequent IC or circuit. This makes it difficult to set the required power supply sequence. When an LDO regulator turns off, the auto discharge function discharges the smoothing capacitor quickly via the internal N-channel MOSFET connected between the VOUT and GND pins, thereby simplifying power supply sequencing.
The following links also provide a description of auto discharge:
Application note: Basics of Low-Dropout (LDO) Regulator ICs
You can perform a parametric search of LDO regulators with an auto discharge function:
Parametric search of LDO regulators with an auto discharge function