부품 번호 검색

상호 참조 검색

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

키워드 검색

파라미터 검색

재고 확인 및 구매

Select Product Categories

1-Channel Brushed DC Motor Driver IC: TB9051FTG

This figure shows a inside of TB9051FTG 1ch Brushed DC Motor Driver IC.

DC motor driver IC in a small package that is capable of controlling the throttle and other valves of a vehicle engine

Development / Design Support

Downloading PSpice® models

Product File Type PSpice Download Motor Type Output Voltage (V) Output Current (A) Features Publish Date
TB9051 zip (36KB) Brushless DC 28 6 PWM type single channel H-bridge DC brushed motor driver for automotive use 2017/10/30

* PSpice is a registered trademark of Cadence Design Systems, Inc.

The TB9051FTG is housed in a small QFN package (measuring 6 mm × 6 mm) and contributes to reducing the size of electronic control units (ECUs). The output stage has a low-on-resistance H-bridge that consists of P-channel and N-channel DMOS transistors. This eliminates the need for a charge pump and thus helps reduce noise and power consumption. To ensure functional safety, the supply voltage monitoring circuit performs initial diagnosis of each on-chip comparator. Applications of the TB9051FTG include opening and closing engine throttle and other valves; retracting electric door mirrors; and seat, rear door open/close and other applications that conduct current
exceeding 3 A.

  • 1-channel PWM H-bridge driver
  • Output current: 5 A
  • Low Ron DMOS: < 0.45 Ω (Pch + Nch DMOS)
  • Forward, reverse, brake, current limit control,
    high-side current monitor, diagnostic output,
    initial diagnosis
  • Through-current protection
  • Operating voltage range: 4.5 to 28 V
  • Operating temperature range: –40 to 125°C
  • Package: PQFN28 (6 mm x 6 mm)

문의

기술 문의

문의

문의

자주 있는 문의

자주 있는 문의

Queries about purchasing, sampling and IC reliability

재고 확인 및 구매

keyword:

Related information

A new window will open