TB9045FNG Series Overview

More and more safety-critical automotive systems, such as electric power steering (EPS) and braking, are required to satisfy ASIL D[Note1], the highest automotive safety integrity level prescribed in the ISO 26262 functional safety standards.
The new IC integrates various failure detection functions, such as high-voltage and low-voltage detection and overheat detection of power supply circuit, to monitor against the IC’s own failure, and a watchdog timer to monitor failure detection of the external microcomputer. An initial diagnosis circuit to detect latent faults in the failure detection circuits is also incorporated to secure higher functional safety.

• Buck-Boost Pre-Regulator
  (Min 2.7 V input, 6 V output, integrated drivers for buck mode,
  External Drivers for Boost Mode)
• Boost Regulator
  Integrated step-down driver and phase compensation filter; 0.8-A current capability Available with an output voltage of 1.1, 1.2 , 1.25 and 1.5
• 5 V Linear Regulator
  (400mA, Integrated Driver)
• 5 V Tracking Regulators
  (100mA × 3 ch, Integrated Driver)
• Safety Mechanism
  • Low-voltage detection, High-voltage detection, Overcurrent detection, Thermal shutdown
  • Window watchdog timer
  • BIST for initial diagnosis
• SPI I/F enables reading of internal status of safety mechanisms
• Absolute Maximum Voltage
  40V (for load dump)
• Recommended Operating Voltage
  2.7V to 18V
• Operating Temperature
  Ta= -40 to 125°C
• Package: 48pin HTSSOP