Asia-Pacific
English
简体中文
繁體中文
한국어
日本語
Americas
English
Europe (EMEA)
English



부품 번호 검색

상호 참조 검색

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

키워드 검색

파라미터 검색

재고 확인 및 구매

Overcurrent protection function (VCE(sat) detection) and built-in active Miller clamp function

TLP5214A

We have introduced a smart-gate driver coupler (TLP5214A, TLP5214) with built-in VCE(sat) detecting and Miller clamping functions to protect the IGBT from being damaged by overcurrent. The VCE(sat) detecting function monitors the VCE(sat) voltage of the IGBT and soft-turns off the photocoupler output when an overcurrent occurs. At the same time, FAULT signal is sent to the controller. The Miller clamping function suppresses gate potential rise and IGBT malfunction by bypassing the Miller current generated when the IGBT is turned off to ground via the inside of the photocoupler. The TLP5214A and TLP5214 also integrate a number of other functions, including full-swing-voltage outputs and UVLO functions. Reducing the number of external components that have supported these functions has been effective in reducing costs and reducing the size of PCBs.

The collector voltage is monitored by the DESAT pin, and the VCE(sat) rises when an overcurrent occurs in the power device. When the TLP5214A or the TLP5214 DESAT pin voltage exceeds 6.5 V, the VOUT goes to low softly (soft turn-off) and simultaneously FAULT signal is sent to the controller.

Smart Gate Driver Photocouplers

문의

기술 문의

문의

문의

자주 있는 문의

자주 있는 문의

Queries about purchasing, sampling and IC reliability

재고 확인 및 구매

keyword:

Disclaimer for External Link
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.

Related information