M4N Group Sample Software

This page provides a sample software download service for the M4N group.
Please check the target product and function list, and download the appropriate file.

Product Name

Please check the target product.

TMPM4NRF20FG TMPM4NQF20FG TMPM4NNF20FG
TMPM4NRF15FG TMPM4NQF15FG TMPM4NNF15FG
TMPM4NRF10FG TMPM4NQF10FG TMPM4NNF10FG
TMPM4NRFDFG TMPM4NQFDFG TMPM4NNFDFG
TMPM4NRF20XBG TMPM4NQF20XBG -
TMPM4NRF15XBG TMPM4NQF15XBG -
TMPM4NRF10XBG TMPM4NQF10XBG -
TMPM4NRFDXBG TMPM4NQFDXBG -

(*) This sample software operates on the evaluation board of the TMPM4NRF20FG. If a function other than that of the TMPM4NRF20 is to be checked, the CMSIS Core-related files (C startup file and I/O header file) must be changed properly. The BSP-related file is dedicated to the evaluation board (TMPM4NRF20). If a function other than that of the TMPM4NRF20 is to be checked, the BSP-related file must be changed properly.

Function list

Function list for sample software.

Sample Software/Function Description
Analog/Digital converter ADC

1. The sample software displays the ADC value on the terminal emulator.

2. Example of displaying the result of the AD monitor function on the LED.

CAN CAN It is a sample software which transmits and receives an ADC conversion value via CAN test loopback. And the receiving data is output to  the terminal emulator.
CEC CEC The CEC function is used to send and receive between boards, and the received data is output to the terminal emulator.
Clock/Mode control CG Switch to the Low Power Consumption Mode (IDLE/STOP1/STOP2) by the push SW port input as a trigger. Turn on and off the LED depending on the Operation Mode.
Digital/Analog converter DAC This is an example of DAC outputting data input from the terminal emulator.
Digital Noise Filter DNF This sample software is that external interrupt by switch is detected via DNF.
External Bus Interface EBIF Depending on the command (write or read) input on the terminal emulator, stored/read in the SRAM.
Serial bus interface EI2C Sample software is communication sample between 2 evaluation boards. And multi master sample software that read EEPROM using 2 evaluation boards.
Ethernet Controller ETHM It is a sample software which transmits and receives character strings via ethermac loopback. And the receiving data is output to  the terminal emulator.
FIR computational circuit FIR Use the FIR function to filter the audio binary data by FIR.
Flash control FLASH

1. Example of running a program in the internal RAM and performing delete and rewrite of the internal flash memory.

2. Example of rewriting the data flash memory and the user information area of code flash memory.

3. Example of setting the protection function for the page and/or the block of code flash memory.

Full Universal Asynchronous Receiver Transmitter Circuit FUART

1. The data input from the terminal emulator on the PC are echoed back.

2. The data input from the terminal emulator on the PC are echoed back. The sample software uses MDMAC.

High Speed DMA Controller HDMAC

1. The data input on the terminal emulator are sent to memory by DMA. The data sent to memory are displayed on the PC.

2. The data input on the terminal emulator are sent from memory to SPI by DMA. The data received via loopback of SPI are displayed on the terminal emulator.

Serial bus interface I2C Sample software is communication sample between 2 evaluation boards. And output the received 
I2S interface I2S Example of sending audio binary data.
Interval Sensor Detection Circuit ISD Detect signal by interval sensor, switch to Normal mode from Stop1 mode of Operation Mode.
Long Term Timer LTTMR This sample software generates 32kHz by LTTMR.
Voltage Detection Circuit LVD This sample software compares supply voltage and detection voltage.
Multi-Function DMA Controller MDMAC The data input from the terminal emulator on the PC are echoed back.
Oscillation Frequency Detector OFD The sample software detects error of external high-speed oscillator by comparing to the set frequency width.
I/O port PORT Key presses are determined by polling process to turn on (turn off) the LED.
Remote control signal preprocessor RMC The remote controller code is displayed on the terminal emulator.
Real Time Clock RTC The RTC is operated. The clock data are output to the terminal emulator.
Serial Memory Interface SMIF Depending on the command (write or read) input on the terminal emulator, stored/read in the SRAM.
32-bit Timer Event Counter T32A

1. Example of using the timer interrupt to turn on/off the LED every second. 

2. Output example of duty-variable PPG (programmable square wave).

Trimming Circuit TRM The frequency of the internal high-speed oscillator is adjusted using an external reference signal.
Serial Peripheral  interface TSPI The sample software communicates using 2 ch TSPI and outputs data to the terminal emulator.
Synchronized serial interface TSSI

Example of master/slave transmission/reception using two evaluation boards. Output the received data to the terminal emulator.

Asynchronous Serial Communication Circuit UART

1. Example of receiving the character string from a terminal emulator.

2. The data input from the terminal emulator is transmitted from the transmitting board to the receiving board using the half clock mode.

Download

Please Select the appropriate file for download.

Name

문의

기술 문의

문의

문의

자주 있는 문의

자주 있는 문의