Contributes to downsizing of equipment and reduction of power consumption

Compact, low-current LDO regulator TCR3LM Series
Contributes to downsizing of equipment and reduction of power consumption

Toshiba Electronic Devices & Storage Corporation (“Toshiba”) start mass production of TCR3LM Series, low-current LDO regulators, packaged in DFN4D at Toshiba Semiconductor Thailand.

Demand for IoT communication modules and wearable devices and any mobiles is increasing. While batteries are getting smaller with the demand for initialization, longer battery life is required. In order to achieve long-term operation of the equipment, it is necessary to keep the power consumption of the equipment itself low. One of important things is to keep the current consumption low when devices are in the standby state. The battery will be in standby mode except during operations such as data transfer, but this standby mode will occupy most of the day.

In other words, by keeping the current consumption in this standby state low, it is possible to keep the current consumption of the device itself low, and as a result, it is possible to realize long-time operation even with a small battery capacity.

The new TCR3LM series-a LDO regulator with low current consumption-contributes to reduce the power consumption of equipment. Drop-out performance is improved compared to our another low current LDO TCR2LN series-type [Note 1]. TCR3LM series also offers improved load transient response. This enables more stable output against load fluctuations. In addition, we offer an extensive lineup of output voltage products. Since the max. output current is 300 mA, you can select the best device including our existing-product TCR2LN series. It can be used for a wide range of applications.

TCR3LM series are in surface-mount-type compact, low-profile DFN4D packaging. In addition, small ceramic types can be used for input and output capacitors, making them suitable for power supply lines for mobile devices, wearable devices, and other small devices that require high-density mounting.

[Note 1] Output-current 200 mA

Features

  1. Low Current Consumption (Low Bias Current): IB(ON)=2.2 μA (max) (IOUT=0 mA, Vin=5.5 V)
  2. Low dropout voltage: VDO=344 mV (typ.) (VOUT=1.8 V, IOUT=200 mA)
  3. Load Transient Response Characteristics: -70/+35 mV (typ.) (VOUT=2.8 V, IOUT=1 mA⇔100 mA)

1. Low Current Consumption (Low Bias Current): IB(ON)=2.2 μA (max) (IOUT=0 mA, Vin=5.5 V)

Bias current is the current that flows through the input of the LDO regulator when no output current flows, and the current is required to operate LDO regulator itselves. LDO regulator is used as a power supply for various functional blocks, such as various sensing and data communications. These functions are not always in operation, and some of them may not be in standby mode. In the standby mode, almost no current is supplied to LDO regulator output. Therefore, by making the operating times of the functions as short as possible, measures are taken to keep the average-consumption current (power) of the entire device low. In this case, only the bias current flows from the battery. This characteristic is important to reduce the current consumption. TCR3LM Series suppresses the biasing current to 2.2 μA (max), contributing to power saving and long-time driving of the entire equipment.

2. Low dropout voltage: VDO=344 mV (typ.) (VOUT=1.8 V, IOUT=200 mA)

TCR3LM Series has improved the dropout voltage compared to the conventional product while reducing the biasing current. Generally, decreasing the bias current will degrade the regulator performance. The TCR3LM series has succeeded in both reducing bias current and improving dropout voltage by reviewing the circuit configuration. Since the desired output voltage can be obtained at a lower input voltage than the conventional product, the power consumption can be reduced due to the voltage difference.

3. Load Transient Response Characteristics: -70/+35 mV (typ.) (VOUT=2.8 V, IOUT=1 mA⇔100 mA)

TCR3LM Series has improved the load-transient response-characteristics compared to the conventional product while reducing the biasing current. Generally, decreasing the bias current will degrade the regulator performance. A load transient response indicates the magnitude of output voltage fluctuation that occurs when the output current suddenly increases or decreases. There is a trade-off between reducing the biasing current and deteriorating this performance, but TCR3LM Series has succeeded in improving both by reviewing the circuitry.

Fig. 1 Comparison of load transient response characteristics with conventional products
Fig. 1 Comparison of load transient response characteristics with conventional products

Applications

  • Mobile devices
  • Wearable terminal
  • IoT Communication Modules

Main Specifications

(Unless otherwise specified, Ta=25 °C)

Product Number TCR2LN series[Note 2] TCR3LM series
Package Name SDFN4 DFN4D
Size (mm) Typ. 0.8×0.8, t=0.38 1.0×1.0, t=0.37
Operating range
(Ta=-40 to 85 °C)
Input-voltage VIN (V) 1.5 to 5.5 1.4 to 5.5
Output-Voltage VOUT (V) 0.8 to 3.6 0.8 to 5.0
Output-current IOUT (mA) 200 300
Electrical characteristics
(Unless otherwise specified,
Tj=-40 to 85 °C)
Biased current IB(ON) (μA) Max 2.0
(IOUT=0 mA,
VIN=2.5 V [Note 3])
2.2
(IOUT=0 mA,
VIN=5.5 V [Note 3])
Dropout Voltage VDO (mV) Max 600
(IOUT=150 mA,
VOUT=1.8 V)
445
(IOUT=200 mA,
VOUT=1.8 V)
Load-transient response⊿
VOUT (mV)
Tj=25 °C Typ. -400/+400
(1⇔10 mA)
-70/+35
(1⇔100 mA)
Control terminal
Threshold voltage
VCTH (V)
Control terminal
input-voltage "HIGH"
Min - 0.9
Control terminal
Threshold voltage
VCTL (V)
Control terminal
input-voltage "LOW"
Max - 0.4
Control-Voltage (ON) VCT (ON) Min 1.0 -
Control-voltage (OFF) VCT (OFF) Max 0.4 -
Overcurrent protection function Yes
Overheat protection function Yes
Auto discharge function Yes
Sample Check & Availability Buy Online Buy Online

[Note 2] Existing products
[Note 3] Control pull-down current (ICT) is not included.

Product information

Contacts

Technical inquiry

Contact us

Contact us

Frequently Asked Questions

FAQs

Queries about purchasing, sampling and IC reliability

Stock Check & Purchase

keyword:

Click this link to check inventory of TOSHIBA parts available at those distributors of Toshiba Electronics Europe GmbH ("TEE") who participate in netCOMPONENTS electronic components sourcing database. By clicking “click here to purchase” above, you will be opening a new browser window and leave our website to the each distributor's page. Please note that TEE provides this link solely as a convenience and for informational purposes only. By providing the link TEE does not guarantee availability of TOSHIBA part(s) as presented on the each distributor's page. TEE bears no responsibility for the accuracy or content of this external site. All information on this StockCheck page about TOSHIBA parts and their availability are provided by the netCOMPONENTS electronic components sourcing database.

* Company names, product names, and service names may be trademarks of their respective companies.
* Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.

A new window will open