This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
3글자 이상 입력하세요.
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
3글자 이상 입력하세요.
Example of circuit using brushless DC motor
Type 1
Part number | |
---|---|
Package | |
VBB [V] |
600 |
IOUT [A] |
0.7 |
VCC (Max) [V] |
17.5 |
Protective function |
Current limitation, overcurrent protection, |
Type 2
Part number | TPD4163F | TPD4164F | |
---|---|---|---|
Package | P-HSSOP31-0918-0.80-002 | ||
VBB [V] |
600 |
||
IOUT [A] |
2.5 |
1.0 | 2.0 |
VCC [V] |
13.5 to 16.5 |
TX00 Series M030 Group
Part number | TMPM037FWUG | |
---|---|---|
Maximum operation frequency |
20 MHz |
20 MHz |
Instruction ROM |
128 KB |
128 KB |
RAM |
16 KB |
16 KB |
Timer |
14ch |
10ch |
UART / SIO |
6 |
5 |
I2C | 2 | 1 |
AD converter | 8ch (10bit) | 8ch (10bit) |
Part number | TB6584AFNG | TB6586AFG | |
---|---|---|---|
VCC [V] |
6 to 16.5 |
6.5 to 16.5 | |
IOUT [A] |
0.002 |
0.003 | |
Drive mode |
Sine wave drive |
Square wave drive | |
Features |
Lead angle control: Auto phase control (current feedback) Sensor input: Hall device/Hall IC compatible Internal regulator: 5 V, 30 mA (Max) Error detection: overcurrent protection, position signal error, low voltage |
Lead angle control: External Input Sensor input: Hall device/Hall IC compatible Internal regulator: 5 V, 35 mA (Max) Error detection: overcurrent protection, position signal error, low voltage |