-
My ToshibaSemicon
- 홈페이지 보기
-
반도체 보기
-
애플리케이션
Body Electronics
xEV
In-Vehicle Infotainment
Advanced Driver-Assistance Systems (ADAS)
Chassis
Infrastructure
BEMS/HEMS
Factory Automation
Commercial Equipment
IoT Equipment
Healthcare
Wearable Device
Mobile
Computer Peripherals
-
제품
-
개발/설계 지원
-
기술 자료
- 구매처 보기
-
- 스토리지 보기
- 회사 개요 보기
- 부품 번호 검색
- 상호 참조 검색
- 키워드 검색
- 파라미터 검색
- 재고 확인 및 구매
This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
3글자 이상 입력하세요.
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
3글자 이상 입력하세요.
TB9044AFNG Overview
Low-voltage operation (VB: 2.7V～), 3ch Power Supply for Sensors Safety mechanisms suitable for ASIL D systems
More and more safety-critical automotive systems, such as electric power steering (EPS) and braking, are required to satisfy ASIL D[Note1], the highest automotive safety integrity level prescribed in the ISO 26262 functional safety standards.
The new IC integrates various failure detection functions, such as high-voltage and low-voltage detection and overheat detection of power supply circuit, to monitor against the IC’s own failure, and a watchdog timer to monitor failure detection of the external microcomputer. An initial diagnosis circuit to detect latent faults in the failure detection circuits is also incorporated to secure higher functional safety.
- Buck-Boost Pre-Regulator
(Min 2.7 V input, 6 V output, integrated drivers for buck mode,
External Drivers for Boost Mode) - 5 V Linear Regulator
(400mA, Integrated Driver) - 5 V Tracking Regulators
(100mA × 3 ch, Integrated Driver) - Safety Mechanism
- Low-voltage detection, High-voltage detection, Overcurrent detection, Thermal shutdown
- Window watchdog timer
- BIST for initial diagnosis
- SPI I/F enables reading of internal status of safety mechanisms
- Absolute Maximum Voltage
40V (for load dump) - Recommended Operating Voltage
2.7V to 18V - Operating Temperature
Ta= -40 to 125°C - Package: 48pin HTSSOP
Queries about purchasing, sampling and IC reliability
재고 확인 및 구매
3글자 이상 입력하세요.
| Part Number | Authorized Distributor | Stock Quantity | Date | Shopping Cart |
|---|
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.