型號查詢

交叉搜尋

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

關鍵字搜尋

參數搜尋

線上庫存查詢跟購買

This is the block diagram of TB9044FNG System Power Supply IC.

Low-voltage operation (VB: 2.7V~), 3ch Power Supply for Sensors Safety mechanisms suitable for ASIL D systems

More and more safety-critical automotive systems, such as electric power steering (EPS) and braking, are required to satisfy ASIL D[Note1], the highest automotive safety integrity level prescribed in the ISO 26262 functional safety standards.
The new IC integrates various failure detection functions, such as high-voltage and low-voltage detection and overheat detection of power supply circuit, to monitor against the IC’s own failure, and a watchdog timer to monitor failure detection of the external microcomputer. An initial diagnosis circuit to detect latent faults in the failure detection circuits is also incorporated to secure higher functional safety.

Note1: ASIL: Automotive Safety Integrity Level
  • Buck-Boost Pre-Regulator
    (Min 2.7 V input, 6 V output, integrated drivers for buck mode,
    External Drivers for Boost Mode)
  • 5 V Linear Regulator
    (400mA, Integrated Driver)
  • 5 V Tracking Regulators
    (100mA × 3 ch, Integrated Driver)
  • Safety Mechanism
    • Low-voltage detection, High-voltage detection, Overcurrent detection, Thermal shutdown
    • Window watchdog timer
    • BIST for initial diagnosis
  • SPI I/F enables reading of internal status of safety mechanisms
  • Absolute Maximum Voltage
    40V (for load dump)
  • Recommended Operating Voltage
    2.7V to 18V
  • Operating Temperature
    Ta= -40 to 125°C
  • Package: 48pin HTSSOP

聯繫我們

技術方面問題

聯絡我們

聯絡我們

常見問題

常見問答

Queries about purchasing, sampling and IC reliability

線上庫存查詢跟購買

keyword:

Disclaimer for External Link
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.
開啟新視窗