Remote Control Signal Processor (RMC)

Remote Control Signal Processor (RMC)

The formats of output signals of remote controls depend on vendors, because they have not been standardized yet. Generally a long pulse called a leader is generated first when a button on a remote control is pushed, and the information of the button is following. Remote Control Signal Processor (RMC) detects the leader. Even when the leader is not existing, RMC detects another signal which a remote control generates instead.
A typical operation of RMC is as follows; In the case of an infrared remote control, the signal is transferred with infrared carrier to a receiver. After removing the carrier wave, the signal is transferred to RMC. Actually the signal has a lot of noises while the wave flies in the air between the remote control and the receiver. RMC sweeps the noises and recovers the leader signal. When it recognizes the leader, it generates an interrupt to CPU.

Lineup

Microcontrollers products incorporating a Remote control signal processor are displayed.

문의

기술 문의

문의

문의

자주 있는 문의

자주 있는 문의

Queries about purchasing, sampling and IC reliability

재고 확인 및 구매

keyword:

Disclaimer for External Link
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.