TLCS-900/H1 Series Development System

In-Circuit Emulation System for 92CF29A/30

In-Circuit Emulation System for 92CF29A/30

The RTE900/H1 In-Circuit Emulation System for 92CF29A/30 is comprised of the Integrated Development Environment, RTE900/H1 On-Chip Debug Emulator, In-Circuit Adapter, and accessories.

  • Real-time PC/PD trace.
  • Trace control using an event feature.
  • Capable of referring to the memory during program execution.
Host interface USB2.0 High-speed
Emulation memory Target memory
Event Number of points 8 points
Comparison items Address, data, status, external input
Comparison conditionscondition Match, unmatch, range
Pass count 1 to 256 times
Event trigger actions Break, trace control, timer control, external trigger output
Event combinations AND, OR, sequential
Hardware break 4 points
Software break 1024 points
Trace memory Capacity 256 frames (Notes-1)
Trace memory Modes Free trace, trigger trace, sampling trace
Trace items PC address, data address, data value, status, external output, external input, event
Trace overflow actions Overwriting, overwriting prohibit, break
Timer measurement Run timer: 1 channel, Lap timer: 1 channel
Memory access Memory display during program execution 64 bytes
Memory rewrite during program execution 1 address(byte/word/Long word either) (Notes-2)
Program variables Display Binary, octal, decimal or hexadecimal display can be selected for each variable.
Registration Variables, arrays, structures and unions can be registered by the elements.
Sauce display - Source
- Source + assembler code
- Source + assembler code + machine language
External output 1 line
External input 1 line
Performance analysis: Module time measurement -
Performance analysis: Coverage measurement -
Flash programming/security feature External Flash memory can be programmed during debugging.

(Notes-1) There are some cases where the trace memory capacity varies by a tracing condition or operating status.
(Notes-2) A break occurs whenever rewritten.

Product Configuration and Appearance of In-Circuit Emulation System for 92CF29A/30

Product Configuration
Product Configuration

Content of Product

RTE900/H1 On-Chip Debug Emulator

  • RTE900/H1 On-Chip Debug Emulator main body
  • Communication cable (Pre-plugged to the emulator.Note)
  • Communication connector (Note)
  • One license for downloading the Integrated Development Environment from website.
    (Note) Made by Samtec,Inc.


In-Circuit Adapter

  • In-Circuit Adapter main body
  • QFP socket (QFP adapter)
  • Emulation connector (Pin protector)
  • Guide screw
  • Manual


Items to Be Prepared by Customer

  • Host system
  • USB cable (emulator side: B-type connector)
  • Target system

 

External Dimensions
External Dimensions
Example of mounting In-Circuit Adapter
Example of mounting In-Circuit Adapter

About Emulation Operating Voltage/Frequency

Any operating frequency and operating voltage in the device (TMP92CF26AXBG) of In-Circuit Adapter operation assurance range is available.
Note that the power/clock cannot be supplied from the emulator to the target system.

Precautions for USB Connection

  • The emulator is connected to the host system via the USB. (USB2.0 High-speed)
  • To newly connect the emulator to the host system, it is necessary to install a USB driver.

Accessory

Example of mounting In-Circuit Adapter
Example of mounting In-Circuit Adapter

Communication Cable

The communication cable is used to connect the emulator or the FLASH Writer to the target system. It is pre-plugged to the emulator or the FLASH Writer.
The communication cable is available from Samtec, Inc. For detailed specifications, please visit Samtec, Inc. website.

The recommended product can also be purchased from the following agencies.

Name Part Number Remark
Communication cable FFSD-10-D-07.00-01-N Pre-plugged to the emulator or the FLASH Writer

QFP Socket / Emulator Connector (QFP Adapter / Pin Protector)

The QFP socket and the emulator connector is used to connect the In-Circuit Adapter to the target system.
There is available from TOKYO ELETECH CORPORATION. For detailed specifications, please visit TOKYO ELETECH CORPORATION website.

  • Move to TOKYO ELETECH CORPORATION website
Name Part Number Remark
QFP socket (QFP adapter) NQPACK176SE -
Emulator connector (Pin protector) YQPACK176SE
-

Note: Parenthesized notations are the names in the instruction manual accompanying the product.

QFP Socket Cover (Top Cover for IC Package)

The QFP socket cover is used, together with the target connector, to mount an MCU on the target system.
The QFP socket cover is manufactured by TOKYO ELETECH CORPORATION. For information about the specification of this product, please refer to TOKYO ELETECH CORPORATION’s website.

  • Move to TOKYO ELETECH CORPORATION website

문의

기술 문의

문의

문의

자주 있는 문의

자주 있는 문의