Overcurrent protection function
The overcurrent protection function of the load switch IC is a function that protects the device from degradation or breakdown caused by heat generated by the device itself by suppressing the output current when the output VOUT terminal is in an unintended short-circuit mode. It is also called current limit or OCP (Over Current Protection). Toshiba load switch ICs employ a foldback-type protection circuit control method, which contributes to safety design.
We mass-produce a load switch IC with a built-in overcurrent protection function of the foldback type.
For example, when the output current reaches the internal overcurrent limit when the load is short-circuited, the MOSFET inside the load switch is turned off, thereby reducing the output voltage VOUT and limiting the output current IOUT. This function suppresses element heat generation during overcurrent operation. The overcurrent value has a fixed value for each product, and the product lineup covers a wide range from a low current value of several hundred mA to over 1.0 A.
Load switch IC built-in overcurrent protection function
Questions about purchasing, sampling and IC reliability
재고 확인 및 구매
3글자 이상 입력하세요.
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.