This webpage doesn't work with Internet Explorer. Please use the latest version of Google Chrome, Microsoft Edge, Mozilla Firefox or Safari.
3글자 이상 입력하세요.
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
3글자 이상 입력하세요.
This reference design provides the Motor Control Closed-loop system using Toshiba's 3 phase brushless DC motor driver IC TB6605FTG. The board is designed as a plug-in board (Shield) for Arduino UNO platform.
“Design・Document” contains the documents listed below.
“Design・File” contains the contents listed below.
Part Number | Device Category | Portion Usage | Description |
---|---|---|---|
IC | TB6605FTG | Motor control: 1pc | TB6605FTG is a 3-phase full-wave sine-wave PWM brushless motor control IC.Sine-wave PWM driving with 2-phase modulation enables driving in high efficiency and low noise condition. |
IC | TC75S51F | Op-Amp: 2pcs | The TC75S51F/TC75S51FU/TC75S51FE is a CMOS singleoperation amplifier which incorporates a phase compensation circuit. It is designed with a low-voltage and low-current power supply; this differentiates this device from general-purpose bipolar op-amps. |
IC | TK20P04M1 | MOSFET: 6pcs | High-speed switching / Low gate charge / Low drain-source on-resistance / Low leakage current |