SiC devices suitable for power supply circuits

SiC Schottky barrier diodes (SBDs) have achieved high breakdown voltages for SBDs, which are difficult to achieve with Si materials, and significantly reduced reverse-recovery times (charges) that could not be achieved with p-n junction diodes, such as Si-FRD(Fast Recovery Diode).
Our products have also improved the leakage current and surge current, which are drawbacks of SBD, by adopting an improved JBS structure.
As shown in the table below, SiC achieves various characteristics required for power supply circuits that have been difficult to realize with Si diodes.

Superiority comparison between Si and SiC
Electrical characteristics and symbols
(Improvement direction)
Effect on circuits Si material SiC material
FRD* SBD SBD

SBD
(Improved JBS structure)

Reverse voltage, VR
(high)
Voltage surge during switching ★★★★ ★★★★★ ★★★★★
Leakage current, IR
(low)
Thermal runaway ★★ ★★★ ★★★★★
Forward Voltage, VF
(low)
Considerable effect on efficiency ★★★ ★★★★★ ★★★ ★★★
Reverse recovery time, trr
(low)
Considerable effect on efficiency ★★★★★ ★★★★★ ★★★★★
Surge current, IFSM
(large)
Inrush current when switching on

★★★★★

★★ ★★★

The greater the number of ★, the better.

* FRD: Fast recovery diode

SiC schottky barrier diodes

Related information

문의

기술 문의

문의

문의

자주 있는 문의

자주 있는 문의

Queries about purchasing, sampling and IC reliability

재고 확인 및 구매

keyword:

Disclaimer for External Link
Through this website you are able to proceed to the website of our distributors ("Third Party Website") which is not under the control of Toshiba Corporation and its subsidiaries and affiliates (collectively "Toshiba"). The Third Party Website is made available to you as a convenience only and you agree to use the Third Party Website at your own risk. The link of the Third Party Website does not necessarily imply a recommendation or an endorsement by Toshiba of the Third Party Website. Please be aware that Toshiba is not responsible for any transaction done through the Third Party Website, and such transactions shall be subject to terms and conditions which may be provided in the Third Party Website.