Europe (EMEA)

Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

LDO Regulator TCR3UG Series Application for Power Supply of IoT Devices

This reference design provides document with low consumption current, PSRR, and dynamic response.The LDO has small package, low consumed power, and fast load transient response.

Power supply circuit example of LDO regulator TCR3UG series application for power supply of IoT devices.
Power supply circuit example
Load transient response characteristics of LDO regulator TCR3UG series application for power supply of IoT devices.
Load transient response characteristics


  • The TCR3UG series have compatibility with low consamption current (low quiscent current and low stand-by current) and  fast load transient response, qnd these devices are ideal for battery drive IoT devices that require low power consumption.
  • This voltage regulators have 31 output voltage linups from 0.8 V to 5.0 V.
  • As small ceramic input and output capacitors can be used with the TCR3UG series.


  • Ultra small package WCSP4F (0.645 mm x 0.645 mm (typ.), t: 0.33 mm (max))
  • Low quiescent bias current IB = 0.34 μA (up to 1.5V Output products, typ.) @IOUT = 0 mA
  • Wide range output voltage (VOUT = 0.8 V to 5.0 V)
  • High ripple rejection ratio 70 dB (0.8V Output product, typ.)@1 kHz
  • Fast load transient response ±60 mV (0.8V Output product, typ.) @1 mA⇔50 mA, COUT = 1 μF
  • Low dropout voltage VDO = VIN - VOUT = 155 mV (3.3V Output product, typ.) @IOUT = 300 mA
  • Overcurrent protection function
  • Thermal shutdown function
  • Built-in auto-discharge function (TCR3UGxxA series) / Not-built-in auto-discharge function (TCR3UGxxB series)
  • Inrush current reduction function ( output voltage soft start )

Reference design files

Design, Document

“Design・Document” contains the documents listed below.


Design, File

“Design・File” contains the contents listed below.

Name Date

Toshiba items

Part Number Device Category Portion Usage Description
TCR3UGxx* LDO Regulator 1 Output voltage lineups 0.8 to 5.0V, IB=0.34 μA(typ.)/WCSP4F
*:New product




Technical inquiry

Contact us

Contact us

Frequently Asked Questions