Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

How can I quickly bring the output voltage of a circuit with an LDO to zero in order to set a power supply sequence for the load IC?

LDOs with an auto discharge function

Use an LDO with an auto discharge function to quickly force the output voltage to zero. When the LDO is disabled, the auto discharge function turns on the MOSFET connected between VOUT and GND to quickly discharge the output capacitor, thereby reducing the output voltage to nearly zero.

To perform a parametric search of LDOs with an auto discharge function, click:

For other LDO regulators, visit the main web page of LDO regulators at:

A new window will open