Europe (EMEA)

Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

What is the difference between the open collector output type and the totempole output type? Also, what precautions should be taken for use?

Totempole output has an output circuit with two transistors combined between VCC and GND. The high or low level is determined without setting pull-up resistance to the output. Totempole output can both sink and source. For open collector output, a transistor's collector is externalized on the output. Therefore, high or low operation cannot be performed without connecting pull-up resistance. Open collector output only sinks.

Totempole output (Example: TLP2345)
Totempole output (Example: TLP2345)
Open collector output (Example: TLP2362)
Open collector output (Example: TLP2362)