Europe (EMEA)

Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Up to what level of voltage can be used at the switch section of a photorelay?

A voltage to be used should be at a level below the value for OFF-state output terminal voltage VOFF. Since this is the absolute maximum rating, a state in which it is exceeded even only once must be prevented. For a working voltage, Toshiba recommends up to approx. 80% of the VOFF value. The specified VOFF value is written in the technical documents.