Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

When controlling a load with a triac coupler, can a load be controlled even if using a rectangular wave power supply at the load side instead of a sinusoidal wave (AC) power supply?

When controlling the turning ON/OFF of a load with a triac coupler, the power supply is intended to be used at a commercial frequency of sinusoidal wave.(50/60Hz). Using a rectangular wave power supply is not recommended, because if doing so, high-frequency components contained in a rectangular wave may cause malfunction.

A new window will open