require 3 characters or more.
About information presented in this cross reference
The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.
Select Product Categories
Select Application
Find everything you need for your next product design. Simply select an application and click through to the block diagram to discover our semiconductor solutions.
New Products / News
Pyroelectric infrared sensor used low noise Op-amp TC75S67TU
Introduction of infrared sensor application of TC75S67TU
Human sensor application method and notes of TC75S67TU
“Design・Document” contains the documents listed below.
“Design・File” contains the contents listed below.
Part Number | Device Category | Portion Usage | Description |
---|---|---|---|
TC75S67TU | Op-amp | First stage amplifier section・1 Second stage amplifier section・1 |
VNI=6nV/√Hz(typ)@VDD=2.5V / UFV(SOT-353F) |
* Cadence, the Cadence logo, OrCAD and OrCAD logo are trademarks or registered trademarks of Cadence Design Systems, Inc.
* Other company names, product names, and service names may be trademarks of their respective companies.