Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Select Product Categories

For signals to be switched, up to what frequency can be used?

For signals to be passed through the switch between the output terminals in a photorelay, the degree of damage on their waveform quality varies depending on the performances of COFF, the output capacitance when the photorelay is OFF, and RON, the resistance between the output terminals when the photorelay is ON (ON-state resistance). Products in a product series with these RON and COFF being small can even handle GHz signals. They can also be used for tester applications.

A new window will open