Europe (EMEA)

Part Number Search

Cross Reference Search

About information presented in this cross reference

The information presented in this cross reference is based on TOSHIBA's selection criteria and should be treated as a suggestion only. Please carefully review the latest versions of all relevant information on the TOSHIBA products, including without limitation data sheets and validate all operating parameters of the TOSHIBA products to ensure that the suggested TOSHIBA products are truly compatible with your design and application.
Please note that this cross reference is based on TOSHIBA's estimate of compatibility with other manufacturers' products, based on other manufacturers' published data, at the time the data was collected.
TOSHIBA is not responsible for any incorrect or incomplete information. Information is subject to change at any time without notice.

Keyword Search

Parametric Search

Stock Check & Purchase

Can high-frequency signals be switched ON/OFF with a triac coupler?

Triac couplers are designed to turn the commercial power supply ON/OFF and are not suitable for high-frequency signal switching control. At high frequencies, a voltage rises or falls suddenly. Owing to this voltage slope, a current may flow in the stray capacitance inside the photo triac and cause malfunction.